Accelerating materials development for photoelectrochemical hydrogen production: Standards for methods, definitions, and
- PDF / 1,413,430 Bytes
- 14 Pages / 584.957 x 782.986 pts Page_size
- 44 Downloads / 267 Views
This section of Journal of Materials Research is reserved for papers that are reviews of literature in a given area.
Accelerating materials development for photoelectrochemical hydrogen production: Standards for methods, definitions, and reporting protocols Zhebo Chen and Thomas F. Jaramilloa) Department of Chemical Engineering, Stanford University, Stanford, California 94305-5025
Todd G. Deutschb) Hydrogen Technologies and Systems Center, National Renewable Energy Laboratory, Golden, Colorado 80401
Alan Kleiman-Shwarsctein Department of Chemical Engineering, University of California–Santa Barbara, Santa Barbara, California 93106-5080
Arnold J. Forman Department of Chemistry and Biochemistry, University of California–Santa Barbara, Santa Barbara, California 93106-5080
Nicolas Gaillardc) Hawaii Natural Energy Institute, University of Hawaii at Manoa, Honolulu, Hawaii 96822
Roxanne Garland Hydrogen, Fuel Cells and Infrastructure Technologies, U.S. Department of Energy, Washington, District of Columbia 20585
Kazuhiro Takanabe Department of Chemical System Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
Clemens Heske Department of Chemistry, University of Nevada–Las Vegas, Las Vegas, Nevada 89154-4003
Mahendra Sunkara Department of Chemical Engineering, University of Louisville, Louisville, Kentucky 40292
Eric W. McFarland Department of Chemical Engineering, University of California–Santa Barbara, Santa Barbara, California 93106-5080
Kazunari Domen Department of Chemical System Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
Eric L. Millere) Hawaii Natural Energy Institute, University of Hawaii at Manoa, Honolulu, Hawaii 96822
John A. Turnere) and Huyen N. Dinhd) Hydrogen Technologies and Systems Center, National Renewable Energy Laboratory, Golden, Colorado 80401 (Received 19 June 2009; accepted 7 August 2009)
Photoelectrochemical (PEC) water splitting for hydrogen production is a promising technology that uses sunlight and water to produce renewable hydrogen with oxygen as a by-product. In the expanding field of PEC hydrogen production, the use of standardized Address all correspondence to these authors: a) e-mail: [email protected] b) e-mail: [email protected] c) e-mail: [email protected] d) e-mail: [email protected] e) These authors were editors of this focus issue during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http:// www.mrs.org/jmr_policy DOI: 10.1557/JMR.2010.0020 J. Mater. Res., Vol. 25, No. 1, Jan 2010
© 2010 Materials Research Society
3
Downloaded from https://www.cambridge.org/core. Tulane University Libraries, on 02 Oct 2018 at 04:19:30, subject to the Cambridge Core terms of use, available at https://www.cambridge.org/core/terms. https://doi.org/10.1557/JMR.2010.0020
Z. Chen et al.: Accelerating materials development for PEC hydrogen production: Standards for methods, definitions, and reporting protocols
screening metho
Data Loading...
