Advanced Real Time Imaging II Cutting-Edge Techniques in Materials S
“Real time” imaging techniques have assisted materials science studies especially for non-ambient environments. These techniques have never been collectively featured in a single venue. The book is an assembly of materials studies utilizing cutting edge r
- PDF / 6,885,032 Bytes
- 149 Pages / 453.544 x 683.151 pts Page_size
- 44 Downloads / 140 Views
EDITED BY: Jinichiro Nakano · P. Chris Pistorius Candan Tamerler · Hideyuki Yasuda Zuotai Zhang · Neslihan Dogan · Wanlin Wang Noritaka Saito · Bryan Webler
The Minerals, Metals & Materials Series
Jinichiro Nakano P. Chris Pistorius Candan Tamerler Hideyuki Yasuda Zuotai Zhang Neslihan Dogan Wanlin Wang Noritaka Saito Bryan Webler •
•
•
•
Editors
Advanced Real Time Imaging II Cutting-Edge Techniques in Materials Science Studies
123
Editors Jinichiro Nakano National Energy Technology Laboratory/Leidos Albany, OR, USA P. Chris Pistorius Carnegie Mellon University Pittsburgh, PA, USA Candan Tamerler The University of Kansas Lawrence, KS, USA Hideyuki Yasuda Kyoto University Kyoto, Japan
Neslihan Dogan McMaster University Hamilton, ON, Canada Wanlin Wang Central South University Changsha, Hunan, China Noritaka Saito Kyushu University Fukuoka, Japan Bryan Webler Carnegie Mellon University Pittsburgh, PA, USA
Zuotai Zhang South University of Science and Technology Shenzhen, China
ISSN 2367-1181 ISSN 2367-1696 (electronic) The Minerals, Metals & Materials Series ISBN 978-3-030-06142-5 ISBN 978-3-030-06143-2 (eBook) https://doi.org/10.1007/978-3-030-06143-2 Library of Congress Control Number: 2018964684 © The Minerals, Metals & Materials Society 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors, and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Cover image courtesy of Anna Nakano, National Energy Technology Laboratory This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Contents
Part I
Iron & Steelmaking I
A Novel Method of Surface Tension Test for Melt Slags Based on Hot Thermocouple Technique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zhe Wang, Guanghua Wen, Ping Tang and Zibing Hou
3
In Situ Observation on the Interactions of Nonmetallic Inclusions on the Surface
Data Loading...
