Advances in Additive Manufacturing and Joining Proceedings of AIMTDR
This volume presents research papers on additive manufacturing (popularly known as 3D printing) and joining which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). T
- PDF / 39,656,318 Bytes
- 723 Pages / 453.544 x 683.151 pts Page_size
- 68 Downloads / 204 Views
M. S. Shunmugam M. Kanthababu Editors
Advances in Additive Manufacturing and Joining Proceedings of AIMTDR 2018
Lecture Notes on Multidisciplinary Industrial Engineering Series Editor J. Paulo Davim , Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
“Lecture Notes on Multidisciplinary Industrial Engineering” publishes special volumes of conferences, workshops and symposia in interdisciplinary topics of interest. Disciplines such as materials science, nanosciences, sustainability science, management sciences, computational sciences, mechanical engineering, industrial engineering, manufacturing, mechatronics, electrical engineering, environmental and civil engineering, chemical engineering, systems engineering and biomedical engineering are covered. Selected and peer-reviewed papers from events in these fields can be considered for publication in this series.
More information about this series at http://www.springer.com/series/15734
M. S. Shunmugam M. Kanthababu •
Editors
Advances in Additive Manufacturing and Joining Proceedings of AIMTDR 2018
123
Editors M. S. Shunmugam Manufacturing Engineering Section Department of Mechanical Engineering Indian Institute of Technology Madras Chennai, Tamil Nadu, India
M. Kanthababu Department of Manufacturing Engineering College of Engineering, Guindy Anna University Chennai, Tamil Nadu, India
ISSN 2522-5022 ISSN 2522-5030 (electronic) Lecture Notes on Multidisciplinary Industrial Engineering ISBN 978-981-32-9432-5 ISBN 978-981-32-9433-2 (eBook) https://doi.org/10.1007/978-981-32-9433-2 © Springer Nature Singapore Pte Ltd. 2020 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Singapore Pte Ltd. The registered company address is: 152 Beach Road, #21-01/04 Gateway East, Singapore 189721, Singapore
AIMTDR 2018 C
