Advances in Metal Processing
- PDF / 45,731,650 Bytes
- 387 Pages / 482 x 692 pts Page_size
- 21 Downloads / 208 Views
SAGAMORE ARMY MATERIALS RESEARCH CONFERENCE PROCEEDINGS Recent volumes in the serles: 20th: Characterization of Materials in Research: Ceramics and Polymers Edited by John J. Burke and Volker Weiss
21st:
Advances in Deformation Processing Edited by John J. Burke and Volker Weiss
22nd: Application of Fracture Mechanics to Design Edited by John J. Burke and Volker Weiss
23rd:
Nondestructive Evaluation of Materials Edited by John J. Burke and Volker Weiss
24th:
Risk and Failure Analysis for Improved Performance and Reliability Edited by lohn J. Burke and Volker Weiss
25th:
Advances in Metal Processing Edited by John J. Burke, Robert Mehrabian, and Volker Weiss.
Advances in Metal Processing Edited by
John J. Burke
Army Materials and Mechanics Research Center Watertown, Massachulletts
Robert Mehrablan National Bureau o[ Standards Washington, D.C.
and
Volker Welss Syracuse University Syracuse, New York
PLENUM PRESS • NEW YORK AND WNDON
Library of Congress Cataloging in Publication Data Sagamore Army Materials Research Conference, 25th, Bolton Landing, N.Y., 1978. Advances in metal processing. (Sagamore Army Materials Research Conference proceedings; v. 25) Includes bibliographical references and index. 1. Metal-work-Congresses. 2. Meta1lurgy-Congresses. I. Burke, John J. 11. Mehrabian, Robert. III. Weiss, Volker, 1930• IV. Title. V. Series: Sagamore Army Material Research Conference. Proceedings; v. 25. UF526.3.S3 vol. 25 [TS200) 623'.028s (671) 81-439 ISBN-13: 978-1-4615-8302-8 DOI: 10.1007/978-1-4615-8300-4
e-ISBN-13: 978-1-4615-8300-4
Proceedingsof the Twenty-Fifth Sagamore Army Materials Research Conference, held Ju1y 17-21, 1978, Sagamore Hotel, at Bolton Landing, Lake George, New York.
©1981 Plenum Press, New York Softcover reprint of the hardcover 1st edition 1981 A Division of Plenum Publishing Corporation 233 Spring Street, New York, N.Y. 10013 All rights reserved No part of this book may be reproduced, stored in a retrieva1 system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, micromming, recording, or otherwise, without written permission from the Publisher
SAGAMORE CONFERENCE COMMITTEE Chairman
DR. J. J. BURKE
Army Materials and Mechanics Research Center Secretary
MR. JOSEPH A. BERNIER
Army Materials and Mechanics Research Center Conference Coordinator
HELEN BROWN DEMASCIO Program Committee
DR. VOLKER WEISS Syracuse University
DR. J. J. BURKE
Army Materials and Mechanics Research Center
PROF. MERTON C. FLEMINGS
Massachusetts Institute of Technology
DR. ROBERT MEHRABIAN National Bureau of Standards
MR. FRANCIS C. QUIGLEY
Army Materials and Mechanics Research Center
DR. GEORGE MAYER Army Research Office
PROF. NICHOLAS GRANT
Masachusetts Institute of Technology
PREFACE
Syracuse University and the Army Materials and Mechanics Research Center of Watertown, Massachusetts have conducted the Sagamore Army Materials Research Conference since 1954. In ce1ebration of the 25th Anniversary of this conference, these proceedings are dedicated t
