Advances in Polymer Processing 2020 Proceedings of the International
This book gathers the proceedings of the International Symposium on Plastics Technology, which was held on March 10, 2020 in Aachen, Germany, and was organised by the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH Aachen University.
- PDF / 16,495,408 Bytes
- 350 Pages / 453.543 x 683.15 pts Page_size
- 47 Downloads / 175 Views
Advances in Polymer Processing 2020 Proceedings of the International Symposium on Plastics Technology
Advances in Polymer Processing 2020
Christian Hopmann · Rainer Dahlmann Editors
Advances in Polymer Processing 2020 Proceedings of the International Symposium on Plastics Technology
Editors Christian Hopmann Institute of Plastics Processing (IKV) RWTH Aachen University Aachen, Germany
Rainer Dahlmann Institute of Plastics Processing (IKV) RWTH Aachen University Aachen, Germany
ISBN 978-3-662-60808-1 ISBN 978-3-662-60809-8 (eBook) https://doi.org/10.1007/978-3-662-60809-8 © Springer-Verlag GmbH Germany, part of Springer Nature 2020 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Planung/Lektorat: Thomas Lehnert This Springer Vieweg imprint is published by the registered company Springer-Verlag GmbH, DE part of Springer Nature. The registered company address is: Heidelberger Platz 3, 14197 Berlin, Germany
Editorial
This edited volume contains the selected papers presented at the International Symposium on Plastics Technology held in Aachen/Germany in March 2020. Lateral thinkers from all over the world have been invited to present their view on the future of plastics technology in an era of major societal and technological changes. On the one hand the growing expectations regarding sustainability and recyclability while keeping efficiency and functionality challenge researchers and industry. On the other hand, digitization and additive manufacturing are powerful drivers for even disruptive changes in processing and production, which offer huge opportunities in plastics technology and stimulate growing interest in both, plastics technology research and industry. The papers presented on the symposium offer a multi-perspective view on these opportunities. They provide scientific insights and knowledge, but as well intent to create awareness and to st
Data Loading...
