Biaxial Fatigue of Metals The Present Understanding
Problems of fatigue under multiaxial fatigue loads have been addressed in a very large number of research publications. The present publication is primarily a survey of biaxial fatigue under constant amplitude loading on metal specimens. It starts with th
- PDF / 1,573,227 Bytes
- 30 Pages / 439.37 x 666.142 pts Page_size
- 26 Downloads / 184 Views
Jaap Schijve
Biaxial Fatigue of Metals The Present Understanding 123
SpringerBriefs in Applied Sciences and Technology
More information about this series at http://www.springer.com/series/8884
Jaap Schijve
Biaxial Fatigue of Metals The Present Understanding
123
Jaap Schijve Delft University of Technology Delft The Netherlands
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISBN 978-3-319-23605-6 ISBN 978-3-319-23606-3 (eBook) DOI 10.1007/978-3-319-23606-3 Library of Congress Control Number: 2015948570 Springer Cham Heidelberg New York Dordrecht London © The Author(s) 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper Springer International Publishing AG Switzerland is part of Springer Science+Business Media (www.springer.com)
Contents
Biaxial Fatigue of Metals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Physical Aspects of the Fatigue Phenomenon Under Uniaxial and Biaxial Loading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 The Fatigue Phenomenon Under Uniaxial Loading . . . 2.2 Different Modes of Fatigue Crack Growth . . . . . . . . . 2.3 The Fatigue Phenomenon Under Biaxial Load Cycles . 3 Biaxial Fatigue Research Programs . . . . . . . . . . . . . . . . . . . 3.1 Two Methods to Describe Biaxial Load Conditions. . . 3.2 Specimens for Research on Biaxial Fatigue . . . . . . . . 4 Predictions of Fatigue Properties for Biaxial Fatigue Loads . . . 4.1 Predictions and the Similarity Concept . . . . . . . . . . . 4.2 Biaxial Fatigue of Full-Scale Structures . . . . . . . . . . . 5 Summarizing Conclusions. . . . . . . . . . . . . . . . . . . . . . . . . . References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
...... ...... . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
Data Loading...
