Casting: An Analytical Approach
For a long time, the die cast industry has used trial and error as a leading development method, resulting in tremendous growth in the utilisation of available CFD (computational fluid dynamics) software. This software allows the development of better pro
- PDF / 3,977,585 Bytes
- 183 Pages / 439.37 x 666.142 pts Page_size
- 38 Downloads / 291 Views
Series Editor Professor Brian Derby, Professor of Materials Science Manchester Materials Science Centre, Grosvenor Street, Manchester, M1 7HS, UK
Other titles published in this series: Fusion Bonding of Polymer Composites C. Ageorges and L. Ye Composite Materials D.D.L. Chung Titanium G. Lütjering and J.C. Williams Corrosion of Metals H. Kaesche Corrosion and Protection E. Bardal Intelligent Macromolecules for Smart Devices L. Dai Microstructure of Steels and Cast Irons M. Durand-Charre Phase Diagrams and Heterogeneous Equilibria B. Predel, M. Hoch and M. Pool Computational Mechanics of Composite Materials ´ski M. Kamin Gallium Nitride Processing for Electronics, Sensors and Spintronics S.J. Pearton, C.R. Abernathy and F. Ren Materials for Information Technology E. Zschech, C. Whelan and T. Mikolajick Fuel Cell Technology N. Sammes Computational Quantum Mechanics for Materials Engineers L. Vitos Publication due August 2007
Alexandre Reikher and Michael R. Barkhudarov
Casting: An Analytical Approach
123
Alexandre Reikher, PhD Albany Chicago Co. 8200 100th St. Pleasant Prairie, WI 53158 USA
Michael R. Barkhudarov, PhD Flow Science, Inc. 683A Harkle Road Santa Fe, NM 87505 USA
British Library Cataloguing in Publication Data Reikher, Alexandre Casting : an analytical approach. - (Engineering materials and processes) 1. Founding I. Title II. Barkhudarov, Michael R. 671.2 ISBN-13: 9781846288494 Library of Congress Control Number: 2007928128 Engineering Materials and Processes ISSN 1619-0181 ISBN 978-1-84628-849-4 e-ISBN 978-1-84628-850-0
Printed on acid-free paper
© Springer-Verlag London Limited 2007 FAVOR™ and FLOW-3D® are trademarks and registered trademarks of Flow Science Inc., 683 Harkle Rd. Ste A, Santa Fe, NM 87505, USA. http://www.flow3d.com MATLAB® is a registered trademark of The MathWorks, Inc., 3 Apple Hill Drive, Natick, MA 01760-2098, USA. http://www.mathworks.com Visual Basic® is a registered trademark of Microsoft Corporation, One Microsoft Way, Redmond, WA 98052-6399, USA. http://www.microsoft.com The software disk accompanying this book and all material contained on it is supplied without any warranty of any kind. The publisher accepts no liability for personal injury incurred through use or misuse of the disk. Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case of reprographic reproduction in accordance with the terms of licences issued by the Copyright Licensing Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers. The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant laws and regulations and therefore free for general use. The publisher makes no representation, e
Data Loading...
