Changeable and Reconfigurable Manufacturing Systems
Change, in products and systems, has become a constant in manufacturing. Changeable and Reconfigurable Manufacturing Systems discusses many key strategies for success in this environment. Changes can most often be anticipated but some go beyond the design
- PDF / 10,567,419 Bytes
- 414 Pages / 439.37 x 666.142 pts Page_size
- 77 Downloads / 244 Views
Series Editor Professor D.T. Pham Intelligent Systems Laboratory WDA Centre of Enterprise in Manufacturing Engineering University of Wales Cardiff PO Box 688 Newport Road Cardiff CF2 3ET UK Other titles in this series Assembly Line Design B. Rekiek and A. Delchambre Advances in Design H.A. ElMaraghy and W.H. ElMaraghy (Eds.) Effective Resource Management in Manufacturing Systems: Optimization Algorithms in Production Planning M. Caramia and P. Dell ’Olmo Condition Monitoring and Control for Intelligent Manufacturing L. Wang and R.X. Gao (Eds.) Optimal Production Planning for PCB Assembly W. Ho and P. Ji Trends in Supply Chain Design and Management: Technologies and Methodologies H. Jung, F. F. Chen and B. Jeong (Eds.) Process Planning and Scheduling for Distributed Manufacturing L. Wang and W. Shen (Eds.) Collaborative Product Design and Manufacturing Methodologies and Applications W.D. Li, S.K. Ong, A.Y.C. Nee and C.s McMahon (Eds.)
Decision Making in the Manufacturing Environment R. Venkata Rao Reverse Engineering: An Industrial Perspective V. Raja and K.J. Fernandes (Eds.) Frontiers in Computing Technologies for Manufacturing Applications Y. Shimizu, Z. Zhong and R. Batres Automated Nanohandling by Microrobots S. Fatikow A Distributed Coordination Approach to Reconfigurable Process Control N.N. Chokshi and D.C. McFarlane ERP Systems and Organisational Change B. Grabot, A. Mayère and I. Bazet (Eds.) ANEMONA V. Botti and A. Giret Theory and Design of CNC Systems S.-H. Suh, S.-K. Kang, D.-H. Chung and I. Stroud Machining Dynamics K. Cheng
Hoda A. ElMaraghy Editor
Changeable and Reconfigurable Manufacturing Systems
123
Hoda A. ElMaraghy, PhD, PEng, FSME, FCSME Intelligent Manufacturing Systems (IMS) Center University of Windsor 204 Odette Building 401 Sunset Avenue Windsor, Ontario, N9B 3P4 Canada
ISBN: 978-1-84882-066-1
e-ISBN: 978-1-84882-067-8
DOI 10.1007/978-1-84882-067-8 Springer Series in Advanced Manufacturing ISSN 1860-5168 A catalogue record for this book is available from the British Library Library of Congress Control Number: 2008940430 © 2009 Springer-Verlag London Limited Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case of reprographic reproduction in accordance with the terms of licences issued by the Copyright Licensing Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers. The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant laws and regulations and therefore free for general use. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liabili
Data Loading...
