Composites with Micro- and Nano-Structure Computational Modeling and
This book contains selected, extended papers presented in the thematic ECCOMAS conference on Composites with Micro- and Nano-Structure (CMNS) – Computational Modelling and Experiments held in Liptovský Mikuláš, Slovakia, in May 28 to 31, 2007, as well as
- PDF / 6,700,221 Bytes
- 300 Pages / 439.5 x 666 pts Page_size
- 82 Downloads / 226 Views
Computational Methods in Applied Sciences Volume 9
Series Editor E. Oñate International Center for Numerical Methods in Engineering (CIMNE) Technical University of Catalunya (UPC) Edificio C-1, Campus Norte UPC Gran Capitán, s/n 08034 Barcelona, Spain [email protected] www.cimne.com
Vladimir Kompisˇ
Composites with Microand Nano-Structures Computational Modeling and Experiments
123
Vladimir Kompisˇ Academy of the Armed Forces Liptovsky´ Mikula´ sˇ Slovakia
ISBN 978-1-4020-6974-1
e-ISBN 978-1-4020-6975-8
Library of Congress Control Number: 2008928508 All Rights Reserved c 2008 Springer Science + Business Media B.V. No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording or otherwise, without written permission from the Publisher, with the exception of any material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Printed on acid-free paper 9 8 7 6 5 4 3 2 1 springer.com
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii 1
Torsional Buckling of Single-Walled Carbon Nanotubes . . . . . . . . . . . A.Y.T. Leung, X. Guo, and X.Q. He
1
2
Equilibrium and Kinetic Properties of Self-Assembled Cu Nanoparticles: Computer Simulations . . . . . . . . . . . . . . . . . . . . . . . Roberto Moreno-Atanasio, S.J. Antony, and R.A. Williams
9
3
Method of Continuous Source Functions for Modelling of Matrix Reinforced by Finite Fibres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 ˇ Vladim´ır Kompiˇs, M´ario Stiavnick´ y, Mari´an Kompiˇs, Zuzana Murˇcinkov´a, and Qing-Hua Qin
4
Effective Dynamic Material Properties for Materials with Non-Convex Microstructures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Martin Schanz, Georgios E. Stavroulakis, and Steffen Alvermann
5
Modelling of Diffusive and Massive Phase Transformation . . . . . . . . . 67 Jiˇr´ı Vala
6
The Use of Finite Elements for Approximation of Field Variables on Local Sub-Domains in a Mesh-Free Way . . . . . . . . . . . . . . . . . . . . . 87 V. Sladek, J. Sladek, and Ch. Zhang
7
Modelling of the Process of Formation and Use of Powder Nanocomposites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Alexandre Vakhrouchev
8
Modelling of Fatigue Behaviour of Hard Multilayer Nanocoating System in Nanoimpact Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Magdalena Kopernik, Lechosław Tre¸bacz, and Maciej Pietrzyk
v
vi
Contents
9
A Continuum Micromechanics Approach to Elasticity of Strand-Based Engineered Wood Products: Model Development and Experimental Validation . . . . . . . . . . . . . . . . 161 Reinhard St¨urzenbecher, Karin Hofstetter, Thomas Bogensperger, Gerhard Schickhofer, and Josef Eberhardsteiner
10 Nanoindentation of Cement Pastes
Data Loading...
