Computational Modeling, Optimization and Manufacturing Simulation of Advanced Engineering Materials
This volume presents recent research work focused in the development of adequate theoretical and numerical formulations to describe the behavior of advanced engineering materials. Particular emphasis is devoted to applications in the fields of biolo
- PDF / 13,616,944 Bytes
- 392 Pages / 453.543 x 683.15 pts Page_size
- 28 Downloads / 266 Views
Pablo Andrés Muñoz-Rojas Editor
Computational Modeling, Optimization and Manufacturing Simulation of Advanced Engineering Materials
Advanced Structured Materials Volume 49
Series editors Andreas Öchsner, Southport Queensland, Australia Lucas F.M. da Silva, Porto, Portugal Holm Altenbach, Magdeburg, Germany
More information about this series at http://www.springer.com/series/8611
Pablo Andrés Muñoz-Rojas Editor
Computational Modeling, Optimization and Manufacturing Simulation of Advanced Engineering Materials
123
Editor Pablo Andrés Muñoz-Rojas Department of Mechanical Engineering Santa Catarina State University—UDESC Joinville, Santa Catarina Brazil
ISSN 1869-8433 Advanced Structured Materials ISBN 978-3-319-04264-0 DOI 10.1007/978-3-319-04265-7
ISSN 1869-8441
(electronic)
ISBN 978-3-319-04265-7
(eBook)
Library of Congress Control Number: 2016934665 © Springer International Publishing Switzerland 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG Switzerland
Preface
At the time this book is published, the world is experiencing the most spectacular rate of technological developments ever seen in history. This scenario demands a continuous enhancement of engineering materials in order to obtain improved or new mechanical, electrical or, in a more comprehensive sense, thermo-physical properties. Technological achievements usually rely on previous scientific developments and give support to engineering needs. Thus, we can talk of engineering tailored materials (ETM) or advanced engineering materials (AEM), which include the former. This book presents 14 chapters centered in AEMs, covering subjects such as new manufacturing processes or aspects of their computational modeling, optimization procedures aimed at the obtainment of tailored properties, and computational modeling of constitutive behavior. In particular, the b
Data Loading...
