Concurrent Conceptual Design and Materials Selection of Natural Fiber Composite Products
This book covers topics related to developing natural-fiber composite products during the conceptual design stage in the product development process. It describes the concurrent engineering methods and tools applied in natural-fiber composite product deve
- PDF / 2,343,413 Bytes
- 68 Pages / 439.37 x 666.142 pts Page_size
- 28 Downloads / 172 Views
Muhd Ridzuan Mansor Salit Mohd Sapuan
Concurrent Conceptual Design and Materials Selection of Natural Fiber Composite Products 123
SpringerBriefs in Materials
The SpringerBriefs Series in Materials presents highly relevant, concise monographs on a wide range of topics covering fundamental advances and new applications in the field. Areas of interest include topical information on innovative, structural and functional materials and composites as well as fundamental principles, physical properties, materials theory and design. SpringerBriefs present succinct summaries of cutting-edge research and practical applications across a wide spectrum of fields. Featuring compact volumes of 50 to 125 pages, the series covers a range of content from professional to academic. Typical topics might include: • A timely report of state-of-the-art analytical techniques • A bridge between new research results, as published in journal articles, and a contextual literature review • A snapshot of a hot or emerging topic • An in-depth case study or clinical example • A presentation of core concepts that students must understand in order to make independent contributions Briefs are characterized by fast, global electronic dissemination, standard publishing contracts, standardized manuscript preparation and formatting guidelines, and expedited production schedules.
More information about this series at http://www.springer.com/series/10111
Muhd Ridzuan Mansor Salit Mohd Sapuan •
Concurrent Conceptual Design and Materials Selection of Natural Fiber Composite Products
123
Muhd Ridzuan Mansor Faculty of Mechanical Engineering Universiti Teknikal Malaysia Melaka Durian Tunggal, Melaka Malaysia
Salit Mohd Sapuan Department of Mechanical and Manufacturing Engineering, Faculty of Engineering Universiti Putra Malaysia Serdang, Selangor Malaysia
ISSN 2192-1091 ISSN 2192-1105 (electronic) SpringerBriefs in Materials ISBN 978-981-10-6589-7 ISBN 978-981-10-6591-0 (eBook) https://doi.org/10.1007/978-981-10-6591-0 Library of Congress Control Number: 2017955359 © The Author(s) 2018 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warrant
Data Loading...
