Correction to: Effect of build orientation and post-build heat treatment on the mechanical properties of cold spray addi
- PDF / 111,276 Bytes
- 1 Pages / 595.276 x 790.866 pts Page_size
- 95 Downloads / 234 Views
CORRECTION
Correction to: Effect of build orientation and post-build heat treatment on the mechanical properties of cold spray additively manufactured copper parts N. Hutasoit 1 & R. A. Rahman Rashid 1,2 & S. Palanisamy 1,2 & A. Duguid 3
# Springer-Verlag London Ltd., part of Springer Nature 2020
Correction to: The International Journal of Advanced Manufacturing Technology https://doi.org/10.1007/s00170-020-06010-5 The original published article contained a mistake. The author name “S. Palasinamy” should be “S. Palanisamy” which is now correctly shown above. The original article has been corrected.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/ 10.1007/s00170-020-06010-5 * S. Palanisamy [email protected] 1
Department of Mechanical and Product Design Engineering, Faculty of Science Engineering and Technology, Swinburne University of Technology, Hawthorn, Victoria 3122, Australia
2
DMTC Limited, Hawthorn, Victoria 3122, Australia
3
Spee3D, Dandenong, South Victoria 3175, Australia
Data Loading...
