Correction to: Layout optimization of continuum structures embedded with movable components and holes simultaneously
- PDF / 156,763 Bytes
- 1 Pages / 595.276 x 790.866 pts Page_size
- 5 Downloads / 198 Views
CORRECTION
Correction to: Layout optimization of continuum structures embedded with movable components and holes simultaneously Xuan Wang 1,2 & Ping Hu 3 & Zhan Kang 3
# Springer-Verlag GmbH Germany, part of Springer Nature 2019
Correction to: Struct Multidisc Optim https://doi.org/10.1007/s00158-019-02378-5 The original version of this article unfortunately contained a mistake. The Figure 11 in the original article should be replaced by the following figure.
0.8
720
0.6
480
0.4
240
0.2
0
0
100
200 Iteration number (a) Case 1
300
1 Compliance Volume fraction
2400
0 400
Compliance
Compliance
960
3000
1800
0.6
1200
0.4
600
0.2
0
0
50
100
150 200 250 Iteration number (b) Case 2
Fig. 11 Iterative histories of the objective function and volume fraction for case 1 in a and case 2 in b
The online version of the original article can be found at https://doi.org/ 10.1007/s00158-019-02378-5 * Ping Hu [email protected] 1
School of Civil Engineering, Hefei University of Technology, Hefei, China
2
Anhui Key Laboratory of Civil Engineering Structures and Materials, Hefei University of Technology, Hefei, China
3
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian, China
0.8
300
0 350
Volume fraction
1 Compliance Volume fraction
Volume fraction
1200
Data Loading...
