Correction to: Microstructural Evolution and Ductile-to-Brittle Transition in a Low-Carbon MnCrMoNiCu Heavy Plate Steel
- PDF / 311,093 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 28 Downloads / 158 Views
Correction to: Microstructural Evolution and Ductileto-Brittle Transition in a Low-Carbon MnCrMoNiCu Heavy Plate Steel DONGSHENG LIU, MI LUO, BINGGUI CHENG, RUI CAO, and JIANHONG CHEN
https://doi.org/10.1007/s11661-018-4856-0 Ó The Minerals, Metals & Materials Society and ASM International 2018
Correction to: Metallurgical and Materials Transactions A https://doi.org/10.1007/s11661-018-4823-9
IN the original article the following errors occurred: In the last sentence of the first paragraph in the Experimental Procedures section, 11 mm 9 1 mm 9 75 mm is incorrect. The correction dimensions are 11 mm 9 11 mm 9 75 mm. In the second sentence of the fifth paragraph in the Experimental Procedures section, the corrected text is as follows: the impact energy was measured at room temperature, 253 K, 213 K, 188 K, 168 K, or 77 K (RT, 20 °C, 60 °C, 85 °C, 105 °C, or
196 °C) by employing a 450-J instrumented pendulum impact tester with a tup striker of radius 2 mm. In the Results section, section C, first paragraph, second to last sentence, the correct Table citation is Table II. In the fifth sentence of the second paragraph in section C of the Results section, the austenitizing temperature in Celsius is missing. The correct temperature is 1623 K (1350 °C). In section G of the Results section, last paragraph, second to last sentence, ‘‘cf’’ is an error. The correct symbol is rf which stands for the local cleavage fracture stress.
DONGSHENG LIU, MI LUO, and BINGGUI CHENG are with the Institute of Research of Iron and Steel, Jiangsu Shagang Group Co., Ltd, Jinfeng Town, Zhangjiagang, Jiangsu Province 215625, P.R. China. Contact e-mail: [email protected] RUI CAO and JIANHONG CHEN are with the State Key Laboratory of Gansu Advanced Processing and Recycling of Non-ferrous Metallic Metals and Key Laboratory of Non-ferrous Metal Alloys of the Ministry of Education, Lanzhou University of Technology, Lanzhou 730050, P.R. China. The original article can be found online at https://doi.org/10.1007/ s11661-018-4823-9. Article published online August 1, 2018 METALLURGICAL AND MATERIALS TRANSACTIONS A
VOLUME 49A, OCTOBER 2018—5227
Data Loading...
