Correction to: Textural Quantification and Classification of Drill Cores for Geometallurgy: Moving Toward 3D with X-ray
- PDF / 186,173 Bytes
- 1 Pages / 595.276 x 790.866 pts Page_size
- 50 Downloads / 151 Views
Correction
Correction to: Textural Quantification and Classification of Drill Cores for Geometallurgy: Moving Toward 3D with X-ray Microcomputed Tomography (lCT) Pratama Istiadi Guntoro ,1,3 Yousef Ghorbani,1 Alan R. Butcher,2 Jukka Kuva,2 and Jan Rosenkranz1 In article PDF, Table 7 was inadvertently repeated in place of Table 9 instead of placing the appropriate table. However, the article available online is correct. The correct Table 9 is presented here:
Correction to: Natural Resources Research https://doi.org/10.1007/s11053-020-09685-5
The original version of the article unfortunately contained an error in Table 9.
Table 9. Drill core classification performance with AIM—RF. Overall accuracy of the scheme is 84%
True class
Predicted class Sample A
Sample B
Sample C
Sample A
80%
14%
6%
Sample B
12%
84%
5%
Sample C
9%
4%
88%
The original article has been corrected.
Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. 1
Division of Minerals and Metallurgical Engineering, Lulea˚ University of Technology, 971 87, Lulea˚, Sweden. 2 Geological Survey of Finland GTK, PO Box 96 02151 Espoo, Finland. 3 To whom correspondence should be addressed; e-mail: [email protected]
.
The original article can be found online at https://doi.org/10.1007/ s11053-020-09685-5.
Ó 2020 The Author(s)
Data Loading...
