Correction to: The Effect of Aging on the Microstructure of Selective Laser Melted Cu-Ni-Si
- PDF / 291,252 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 82 Downloads / 224 Views
Correction to: The Effect of Aging on the Microstructure of Selective Laser Melted Cu-Ni-Si ANTHONY P. VENTURA, CHRISTOPHER J. MARVEL, GREGORY PAWLIKOWSKI, MARTIN BAYES, MASASHI WATANABE, RICHARD P. VINCI, and WOJCIECH Z. MISIOLEK
https://doi.org/10.1007/s11661-017-4395-0 Ó The Minerals, Metals & Materials Society and ASM International 2017
Correction to: Metallurgical and Materials Transactions A https://doi.org/10.1007/s11661-017-4363-8
IN the Experimental Methods section, second paragraph, last sentence of the original article the value for the resistivity of pure copper is incorrect. The correct value is 1.7241 lX-cm.
ANTHONY P. VENTURA is with the Materials Science and Engineering Department, Loewy Institute, Lehigh University, Bethlehem, PA 18015 and also with Pratt & Whitney, Materials & Processes Engineering, East Hartford, CT 06118. Contact e-mail: [email protected] CHRISTOPHER J. MARVEL, MASASHI WATANABE, and RICHARD P. VINCI are with the Materials Science and Engineering Department, Lehigh University, Bethlehem, PA 18015. GREGORY PAWLIKOWSKI and MARTIN BAYES are with Tyco Electronics Corporation, a TE Connectivity Company, Harrisburg, PA 17111. WOJCIECH Z. MISIOLEK is with the Materials Science and Engineering Department, Loewy Institute, Lehigh University. The original article can be found online at https://doi.org/10.1007/ s11661-017-4363-8. Article published online November 13, 2017 METALLURGICAL AND MATERIALS TRANSACTIONS A
VOLUME 49A, JANUARY 2018—425
Data Loading...