Description of Thermoelastic Composites by a Mean Field Approach
In this Chapter a Mori—Tanaka-type micromechanical method for modeling the thermoelastic behavior of composites with aligned reinforcements is described in some detail.
- PDF / 24,531,708 Bytes
- 314 Pages / 481.467 x 693.936 pts Page_size
- 63 Downloads / 199 Views
Series Editors: The Rectors of CISM
Sandor Kaliszky- Budapest Mahir Sayir - Zurich Wilhelm Schneider - Wien
The Secretary General of CISM Giovanni Bianchi- Milan
Executive Editor
Carlo Tasso- Udine
The series presents lecture notes, monographs, edited works and proceedings in the field of Mechanics, Engineering, Computer Science and Applied Mathematics. Purpose of the series in to make known in the international scientific and technical community results obtained in some of the activities organized by CISM, the International Centre for Mechanical Sciences.
INTERNATIONAL CENTRE FOR MECHANICAL SCIENCES COURSESAND LECTURES- No. 348
ENGINEERING MECHANICS OF FIBRE REINFORCED POLYMERSAND COMPOSITE STRUCTURES
EDITED BY 1. HULT
CHALMERS UNIYERSITY OF TECHNOLOGY AND F.G. RAMMERSTORFER YIENNA UNIYERSITY OF TECHNOLOGY
SPRINGER-VERLAG WIEN GMBH
Le spese di stampa di questo volume sono in parte coperte da
contributi del Consiglio Nazionale delle Ricerche.
This volume contains 131 illustrations
This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned specifically those of translation, reprinting, re-use 'of illustrations, broadcasting, reproduction by photocopying machine or similar means, and storage in data banks. © 1994 by Springer-Verlag Wien
Originally published by Springer-Verlag Wien New York in 1994
In order to make this volume available as economically and as
rapidly as possible the authors' typescripts have been reproduced in their original forms. This method unfortunately has its typographical limitations but it is hoped that they in no way distract the reader.
ISBN 978-3-211-82652-2 DOI 10.1007/978-3-7091-2702-5
ISBN 978-3-7091-2702-5 (eBook)
PREFACE
This monograph is based on the lecture notes ofthe 4th International IUTAM Summer School on "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures" held at the International Center for Mechanical Seiences (CISM) in Udine, Italy, from July 5 to 9, 1993 by (in alphabetic order) Professors M. CHRZANOWSKI Palitechnika Krakowska, Krakow, Poland; P. GUDMUNDSON - Royal Institute of Technology, Stockholm, Sweden; J. HULT - Chalmers University of Technology, Gothenburg, Sweden; G. NONHOFF - Flugzeug- und Triebwerksbau, FH-Aachen, Germany; F.G. RAMMERSTORFER - Vienna University of Technology, Vienna, Austria and -last but not least- G.S. SPRINGER- Stanford University, Stanford, CA, USA.
The book aims at giving an overview of current methods in engineering mechanics of FRP composites as weil as composite or hybrid components and structures. Main emphasis is laid on basic micro and macro mechanics of Iaminates. Continuous as weil as shortfibre composites are studied, and criteria for different kinds of failure are treated. Micromechanical considerations for material characterization and mechanisms of static ductile and brittle rupture are studied, as weil as FRP structures under thermal and dynamic loading programs. Optimum design, manufacturing process Simulationsand environment
