Design and Realization of Fault Monitor Module
Fault monitor module is designed for power grid fault diagnosis and recovery system. It sets interface with dispatching automation platform to get real-time operating data. In order to solve the problem – “Data are flooding but useful fault information is
- PDF / 41,779,263 Bytes
- 1,041 Pages / 439.42 x 683.15 pts Page_size
- 20 Downloads / 172 Views
Wego Wang Editor
Mechatronics and Automatic Control Systems Proceedings of the 2013 International Conference on Mechatronics and Automatic Control Systems (ICMS2013)
Lecture Notes in Electrical Engineering
For further volumes: http://www.springer.com/series/7818
237
Wego Wang Editor
Mechatronics and Automatic Control Systems Proceedings of the 2013 International Conference on Mechatronics and Automatic Control Systems (ICMS2013)
Editor Wego Wang University of Massachusetts Lowell Wellesley, MA, USA
ISSN 1876-1100 ISSN 1876-1119 (electronic) ISBN 978-3-319-01272-8 ISBN 978-3-319-01273-5 (eBook) DOI 10.1007/978-3-319-01273-5 Springer Cham Heidelberg New York Dordrecht London Library of Congress Control Number: 2013950379 © Springer International Publishing Switzerland 2014 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Preface
This book contains papers accepted by the 2013 International Conference on Mechatronics and Automatic Control Systems (ICMS), which was held on 10 and 11 August, 2013, in Hangzhou, China. It covers emerging technologies in a timely manner for two important subjects: mechatronics and automatic control systems. In particular, it allows researchers and students to become familiar with state-of-the-art developments in the field, and i
