DIAL Finite Element System
DIAL is a general purpose 2D and 3D finite element system consisting of a family of independently executable modules called processors; these communicate with each other through a common database (Figure 1). Each processor is driven by a free field comman
- PDF / 33,607,149 Bytes
- 502 Pages / 430.866 x 649.134 pts Page_size
- 62 Downloads / 313 Views
Springer-Verlag Berlin Heidelberg GmbH
C.A. Brebbia Computational Mechanics Centre, Ashurst Lodge Ashurst, Southampton, Hampshire, S04 2AA, UK.
ISBN 978-3-662-07231-8 ISBN 978-3-662-07229-5 (eBook) DOI 10.1007/978-3-662-07229-5
This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concemed, specifically those of translation, reprinting, re-use of illustrations, broadcasting, reproduction by photocopying machine or similar means, and storage in data banks. Under § 54 of the German Copyright Law where copies are made for other than private use a fee is payable to 'Verwertungsgesellschaft Wort', Munich.
© Springer-Verlag Berlin Heidelberg 1982 Originally published by Computational Mechanies Centre, Southampton in 1982. Softcover reprint ofthe hardcover 2nd edition 1982 The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Printed by Hobbs the Printers ofSouthampton :lO61/30'10/5432 10
CONTENTS Preface to the Seccmd Edition How to Use This Handbook Table I.
Element Types
Table 11.
Material Properties
Table 111.
Analysis Capabilities
Table IV.
Other Capabilities
Table V.
Operating Systems
Table VI.
Availability of the Programs
The Use of ADiNA in Engineering Practice
3
K.J. Bathe, Massachusetts Institute 01 Technology & G. Larsson, ADINA Engineering AB
ANSYS
19
P.C. Kohnke, Swanson Analysis Systems Inc.
APPLE-5AP Structural Analysis System
27
M. Galluzzi, M. Giovagnoni & G.M. Manlredini, ltalimpianti S.p.A. Italy
ASAS . A Large-Scale, Sophisticated Finite Element Analysis System
47
J.B. Spooner, Atkins Research & Development
The ASKA Finite Element System
55
R. Goos, Ikoss GMBH
BEASY A Boundary Element Analysis System
81
D.J. Danson, C.A. Brebbia & R.A. Adey, CM Consultants, Southampton
A Description of the BERSAFE System
99
T.K. Hellen, Central Electricity Generating Board
The CASTEM Finite Element System
115
A. Combescure & A. Hoffmann, CEA-DEMT & P. Pasquet, CISI
CA.ST.OR
127
A. Chaudouet & P. Devalan, CE TIM, France
COMET-PR: The First Computer Implementation of the P-Version of the Finite Element Method B. Szabo, Washington University & A. Peano, ISMES, Italy
147
DIAL Finite Element System
159
N.A. Cyr & G.H. Ferguson, Lockheed Missiles & Space Company
FASOR - A Program for Stress, Buckling and Vibration of Shells of Revolution G_A. Cohen, Structures Research Associates
175
The FEGS Limited Pre- and Post-Processing Programs
199
G.A. Butlin, Fegs Limited, Cambridge
The Finite Element Programs FLASH 2 and STATIK U. Walder, Walder & Partners, Bem,
205
& D. Green, Glasgow University, Scotland
GIFTS-1100: Graphics Orientated Interactive Finite Element Time-5haring System C. V. Clarke, Sperry Univac, England & R. Muller, Sperry Univac, West Germany
225
RAFTS and LAWPI LE - The Development of a Foundation Analysis and Design Sui
