Effect of Material Layers in a Compound Circular Receiver Model Design for Concentrating Solar Power
The present study intends to evaluate heat conductance and mechanical strength at elevated temperature of a prototype of flat type receiver composed of carbon steel fin and copper tubes. Considering a compound circular plate composed of different kinds of
- PDF / 10,820,313 Bytes
- 234 Pages / 439.43 x 683.15 pts Page_size
- 62 Downloads / 177 Views
amics and Control of Advanced Structures and Machines
Dynamics and Control of Advanced Structures and Machines
Hans Irschik • Alexander Belyaev • Michael Krommer Editors
Dynamics and Control of Advanced Structures and Machines
123
Editors Hans Irschik Institute of Technical Mechanics Johannes Kepler University Linz Linz, Austria
Alexander Belyaev Institute of Problems in Mechanical Engineering Russian Academy of Sciences St. Petersburg, Russia
Michael Krommer Institute of Mechanics and Mechatronics Vienna University of Technology Vienna, Austria
ISBN 978-3-319-43079-9 DOI 10.1007/978-3-319-43080-5
ISBN 978-3-319-43080-5 (eBook)
Library of Congress Control Number: 2016955567 © Springer International Publishing Switzerland 2017 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG Switzerland
Preface
This book presents a collection of 25 contributions presented during the 2nd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, which was held at TU Wien in September 2015. It contains 9 full-length papers of presentations from Austria, 7 from Russia, 4 from Japan, 3 from Italy and 2 from Taiwan. The general goal of the workshop was to present and discuss the frontiers in the mechanics of controlled machines and structures. The workshop continued a series of international workshops, the Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures, the Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines and the 1st International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The first two workshops took place in Linz, Austria, in September 2008 and April 2010, and the third one in St. Petersburg, Russia, in July 2012. The key objective of the workshop was to further
Data Loading...
