Elastoplastic Behavior of Highly Ductile Materials
This book mainly introduces some basic phenomena and laws of highly ductile materials during elastoplastic deformation, and their engineering applications, such as the transfer and relief of stress concentration in the notch root, the mitigation of possib
- PDF / 4,828,996 Bytes
- 181 Pages / 453.544 x 683.151 pts Page_size
- 68 Downloads / 270 Views
astoplastic Behavior of Highly Ductile Materials
Elastoplastic Behavior of Highly Ductile Materials
Maosheng Zheng Zhifu Yin Haipeng Teng Jiaojiao Liu Yi Wang •
•
•
•
Elastoplastic Behavior of Highly Ductile Materials
123
Maosheng Zheng Northwest University Xi’an, Shaanxi, China Haipeng Teng Northwest University Xi’an, Shaanxi, China
Zhifu Yin Institute of Yanchang Petroleum Group Co. Ltd. Xi’an, Shaanxi, China Jiaojiao Liu Northwest University Xi’an, Shaanxi, China
Yi Wang Northwest University Xi’an, Shaanxi, China
ISBN 978-981-15-0905-6 ISBN 978-981-15-0906-3 https://doi.org/10.1007/978-981-15-0906-3
(eBook)
© Springer Nature Singapore Pte Ltd. 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Singapore Pte Ltd. The registered company address is: 152 Beach Road, #21-01/04 Gateway East, Singapore 189721, Singapore
Preface
Nowadays, the industrialization significantly promotes the progress and application of elastoplasticity. Various new demands and phenomena emerged, which related to the development of materials with high ductility and strength in recent years. Therefore, it requires an appropriate description to present the wide classes of elastoplastic behaviors of such materials. In 2008, a book entitled “Notch Strength and Notch Sensitivity of Materials” (authored by Zheng X., Wang H., Zheng M., and Wang F. H., Science Press, Beijing, China) was published, which is devoted to quantitatively characterize the notch strength and notch sensitivity of both ductile and brittle materials, and aimed to formulate the fracture criteria for notched structures. The present authors have made up their mind to publish the current book as an accompanying contribution to ductile materials, especially due to their wide applications. In writing this book, the fundamental knowledge
Data Loading...
