Electret Filtering PFM
Cleaning of air and gas from suspended solid and liquid particles is of paramount importance in medicine, biochemistry, dectronics, the atomic power industry and many other fields. The most simple, reliable and economical way of cleaning gaseous media of
- PDF / 22,818,892 Bytes
- 217 Pages / 439.37 x 666.142 pts Page_size
- 75 Downloads / 178 Views
MATERIALS PROCESSING
Springer-Verlag Berlin Heidelberg GmbH
Physics and Astronomy
ONLINE L1BRARY
http://www.springer.de/phys/
Springer Series in
MATERIALS PROCESSING Series Editors: H. Warlimont
E. Weber
W. Michaeli
This series is focused on the science and application of materials processing as an essential part of progress in the materials field. It addresses researchers and process engineers alike. The scope of the series includes alI classes of materials - metals, inorganic non-metallic materials, polymers and composites - in the form ofbulk materials, thin films and layered structures as well as micro- and nanostructured forms. AlI aspects of materials processing from fundamental understanding to innovative strategies and methods of practical process implementation and control are covered. It is the aim of the series to provide comprehensive information on the science and application ofleading-edge and welI-established processing technologies. Low-Pressure Synthetic Diamond. Manufacturing and Applications Editors: B. Dischler and C. Wild Purification Process and Characterization of Ultra High Purity Metals. Application of Basic Science to MetalIurgical Processing Editors: Y. Waseda and M. Isshiki Supercritical Fluid Science and Technology Editors: Y. Arai, T. Sako, and Y. Takebayashi Melt Blowing. Equipment, Technology and Polymer Fibrous Materials By L. S. Pinchuk, V. A. Goldade, A.V. Makarevich, V. N. Kestelman Epitaxy. Physical Foundation and Technical Implementation By M. A. Herman and W. Richter
Series homepage - http://www.springer.de/phys/books/ssmp/
L. S. Pinchuk V. A. Goldade A. V. Makarevich V. N. Kestelman
Melt Blowing Equipment, Technology, and Polymer Fibrous Materials With 105 Figures and 21 Tables
Springer
ProtL.S.Pinchuk Prof. V. A. Goldade Prof. A.V. Makarevich V. A. Belyi Metal-Polymer Research Institute of the National Academy of Sciences of Belarus 32a Kirov Street 246050 Gomel Belarus
Prof. V. N. Kestelman KVN International Inc. 632 Jamie Cirele King of Prussia, PA 19406 USA
Series Editors: Professor Dr. H. Warlimont Institut fiir Festk6rper- und Werkstofforschung e.V. Helmholtzstrasse 20, 01069 Dresden, Germany
Professor Dr. E. Weber Materials Science and Mineral Engineering, University of California 587 Evans Hali, Berkeley, CA 94720-1760, USA
Professor Dr. Walter Michaeli Institut fiir Kunststoffverarbeitung, RWTH Aachen PontstraBe 49, 52062 Aachen, Germany ISSN 1434-9795
ISBN 978-3-642-62785-9 ISBN 978-3-642-55984-6 (eBook) DOI 10.1007/978-3-642-55984-6 Library of Congress Cataloging-in- Publication Data Melt blowing: equipment, technology, and polymer fibrous materials / L. S. Pinchuk ... (et al). Berlin; New York: Springer, 2002. p. cm. Springer series in materials processing, ISBN: 3-540-43223-X (alk. paper) 1. Plastics - Extrusion 2. Polymer Melting 1. Pinchuck, L. S. (Leonid Semenovich) II. Series 12701361 TPU75.E9M45 2002 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the right
