Erratum - (Bi,Sb) 2 Te 3 -PbTe chalcogenide alloys: Impact of the cooling rate and sintering parameters on the microstru

  • PDF / 31,197 Bytes
  • 1 Pages / 584.957 x 782.986 pts Page_size
  • 72 Downloads / 167 Views

DOWNLOAD

REPORT

i: 10.1557/jmr.2011.78, Published by Cambridge University Press, 16 May 2011. On the first page of the article, the second author’s name is incorrect as published. The correct name is Jürgen Thomas. The publisher regrets the error.

REFERENCE Alexandre Jacquot, Jürgen Thomas, Joachim Schumann, Martin Jägle, Harald Böttner, Thomas Gemming, Jürgen Schmidt, and Dirk Ebling: (Bi, Sb)2Te3-PbTe chalcogenide alloys: Impact of the cooling rate and sintering parameters on the microstructures and thermoelectric performances. J. Mater. Res. 26(15), 1773 (2011).

DOI: 10.1557/jmr.2011.312 Downloaded IP address: 80.82.77.83, on 2228, Aug2011 2017 at 19:02:38, subject to the Cambridge Core terms 2460from https://www.cambridge.org/core. J. Mater. Res., Vol. 26, No. 18, Sep Ó Materials Research Society 2011 of use, available at https://www.cambridge.org/core/terms. https://doi.org/10.1557/jmr.2011.312

Data Loading...

Recommend Documents
(Bi,Sb) 2 Te 3 -PbTe chalcogenide alloys: Impact of the cooling rate and sintering parameters on the microstructures and

137 103 797KB

Microstructure Size Control through Cooling Rate in Thermoelectric PbTe-Sb 2 Te 3 Composites

151 1 930KB

Influence of porosity on the transport properties of Bi 2 Te 3 -based alloys by field-assisted sintering

147 7 533KB

Tantalum Nitride for Copper Diffusion Blocking on Thin Film (BiSb) 2 Te 3

145 68 2MB

Nanoalloyed Bi 2 Te 3 , Sb 2 Te 3 and Bi 2 Te 3 /Sb 2 Te 3 Multilayers

280 63 2MB

An analysis for geometrical effects on the cooling performance of (Bi, Sb) 2 Te 3 /Bi 2 (Te, Se) 3 -based thin film ther

214 43 340KB

Simulation of the Composition and Cooling Rate Effects on the Solidification Path of Casting Aluminum Alloys

223 58 4MB

Nanostructure formation in bulk thermoelectric compounds in the pseudo binary PbTe-Sb 2 Te 3 system

195 76 413KB

Erratum to: Effect of Cooling Rate on the Dendrite Coherency Point During Solidification of Al2024 Alloy

199 3 313KB

Strong Anisotropic Effects of p -Type Bi 2 Te 3 Element on the Bi 2 Te 3 /Sn Interfacial Reactions

119 85 1MB

Effect of cooling rate and alloying on the

180 99 5MB

Synthesis of (Bi 2 Te 3 ) x (TiTe 2 ) x and (Bi 2 Te 3 ) x (TiTe 2 ) 3 Superlattices

274 73 1MB