• PDF / 35,630 Bytes
• 1 Pages / 584.957 x 782.986 pts Page_size
• 91 Downloads / 189 Views

DOWNLOAD

REPORT

doi: 10.1557/jmr.2016.352, Published by Materials Research Society with Cambridge University Press, 3 October 2016. In Wang et al.,1 the author Ehsan Mostaed’s first name was misspelled as “Ehasn.” The authors regret this error, and the original has since been updated.

REFERENCE 1. L. Wang, H. Zhang, G. Huang, M. Cao, X. Cao, E. Mostaed, and M. Vedani: Formability and anisotropy of the mechanical properties in commercially pure titanium after various routes normal and different speed rolling. J. Mater. Res. (2016), doi: 10.1557/jmr.2016.352.

DOI: 10.1557/jmr.2016.406 Downloaded IP address: on 15 Aug2016 2017 at 16:15:41, subject toResearch the Cambridge Core terms 3472from https://www.cambridge.org/core. J. Mater. Res., Vol. 31,80.82.77.83, No. 21, Nov 14, Ó Materials Society 2016of use, available at https://www.cambridge.org/core/terms. https://doi.org/10.1557/jmr.2016.406

Recommend Documents

Mechanical Behavior of Commercially Pure Titanium Weldments at Lower Temperatures

177 72 6MB

Erratum to: Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

194 34 96KB

In-Plane Anisotropy in Mechanical Behavior and Microstructural Evolution of Commercially Pure Titanium in Tensile and Cy

183 47 4MB

Erratum to: Estimation of Dislocation Density in Cold-Rolled Commercially Pure Titanium by Using Synchrotron Diffraction

182 75 123KB

Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration

169 59 659KB

Orientation Effect on Mechanical Properties of Commercially Pure Titanium at Room Temperature

170 97 638KB

Impact of machining-induced surface defects on the edge formability of commercially pure titanium sheet at room temperat

164 72 4MB

Recrystallization in Commercially Pure Aluminum

177 2 5MB

Interfacial Microstructure and Mechanical Properties of Friction Stir Welded Joints of Commercially Pure Aluminum and 30

113 44 3MB

Evolution of Texture and Microstructure in Commercially Pure Titanium with Change in Strain Path During Rolling

243 0 2MB

Distribution Characteristics of In-Grain Misorientation Axes in Cold-Rolled Commercially Pure Titanium and Their Correla

216 30 2MB

On identification of the nucleant in commercially pure aluminum castings inoculated with <0.15 pct titanium

183 67 1MB