Erratum to: Measurement and Modeling of Hydrogen Environment-Assisted Cracking in Monel K-500
- PDF / 581,808 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 78 Downloads / 183 Views
DOI: 10.1007/s11661-014-2454-3 Ó The Minerals, Metals & Materials Society and ASM International 2014
Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 45A, AUGUST 2014, pp. 3814–3834 DOI: 10.1007/s11661-014-2324-z
IN the original article the vertical axes of Figures 17 and 18 are labeled incorrectly. Following are the corrected figures:
Fig. 18—(Color online) Model predicted (Eq. [2]) and measured Stage II crack growth rate (at elastic K = 50 MPaÖm, Table III; Fig. 9) vs applied cathodic potential for aged Monel K-500 (ATI Allvac, j; Table I) stressed in 3.5 pct NaCl. The rH/rYS equals 12.0 in Eq. [3]. Measured da/dtII values are included for a Special Metals lot of Monel K-500 (Footnote *, m).
Fig. 17—(Color online) Model predicted (Eq. [2]) and measured Stage II crack growth rate (at elastic K = 50 MPaÖm, Table III; Fig. 9) vs crack tip CH-Diff (bottom axis) and stress enhanced CHr (top axis) for aged Monel K-500 (ATI Allvac, j; Table I) stressed in 3.5 pct NaCl at EA between 1100 and 700 mVSCE. The rH/rYS is 12.0 in Eq. [3]. Measured da/dtII are included for a Special Metals lot of Monel K-500 (m) using the corresponding H uptake law (Footnotes * and **).
RICHARD P. GANGLOFF and JOHN R. SCULLY, Professors, and JAMES T. BURNS, Research Assistant Professor, are with the Department of Materials Science and Engineering, Center for Electrochemical Science and Engineering, University of Virginia, Charlottesville, VA 22904. Contact e-mail: [email protected]. HUNG M. HA, formerly Research Scientist with the Department of Materials Science and Engineering, Center for Electrochemical Science and Engineering, University of Virginia, is now Post-Doctoral Research Fellow with the Department of Materials Engineering, University of British Columbia, Vancouver, BC V6T 1Z4, Canada. The online version of the original article can be found under doi: 10.1007/s11661-014-2324-z. Article published online July 4, 2014 4724—VOLUME 45A, SEPTEMBER 2014
METALLURGICAL AND MATERIALS TRANSACTIONS A
Data Loading...
