Erratum to: Modeling of the Austenitization of Ultra-high Strength Steel with Cellular Automation Method
- PDF / 120,465 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 81 Downloads / 195 Views
DOI: 10.1007/s11661-014-2327-9 Ó The Minerals, Metals & Materials Society and ASM International 2014
Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A DOI 10.1007/s11661-014-2255-8
THE following are corrections to the original article: Page 1, Abstract, line 10: 10 K (–263 °C)/s should be 10 K (10 °C)/s. Page 4, Fig. 2 caption: 10 K (794.1 °C)/s should be 10 K (10 °C)/s. Page 5, IV. Procedure of Simulation, second paragraph: 10 K ( 263 °C)/s should be 10 K (10 °C)/s. Page 7, last paragraph: 10 K ( 263 °C)/s should be 10 K (10 °C)/s. Page 10, VI. Impact of the Grain Size on Strain–Stress Curve, first paragraph: 10 K ( 263 °C)/s should be 10 K (10 °C)/s; and 35 K ( 238 °C)/s should be 35 K (35 °C)/s. Page 10, VII. Summary and Conclusions, second paragraph: 10 K ( 263 °C) /s should be 10 K (10 °C) /s.
BIN ZHU, Post-doctor, YISHENG ZHANG and JIAN LI, Professors, and CHAO WANG, PEI XING LIU, and WEI KANG LIANG, PhD Candidates, are with the State Key Lab of Materials Processing and Die & Mold Technology, Huazhong University of Science and Technology, Wuhan 430074, P. R. China. Contact e-mail: [email protected] The online version of the original article can be found under doi: 10.1007/s11661-014-2255-8. Article published online May 21, 2014 METALLURGICAL AND MATERIALS TRANSACTIONS A
VOLUME 45A, AUGUST 2014—4173
Data Loading...
