Erratum to: Modeling the Effect of Carburization and Quenching on the Development of Residual Stresses and Bending Fatig
- PDF / 96,332 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 47 Downloads / 168 Views
JMEPEG (2013) 22:1208 DOI: 10.1007/s11665-012-0350-9
Erratum to: Modeling the Effect of Carburization and Quenching on the Development of Residual Stresses and Bending Fatigue Resistance of Steel Gears Zhichao Li, Andrew M. Freborg, Bruce D. Hansen, and T.S. Srivatsan
Erratum to: J. of Materi Eng and Perform DOI 10.1007/s11665-012-0306-0 The caption for Fig. 10 should read as follows: Stress distributions from the dynamic contact analyses. (a) With heat-treatment residual stresses and (b) without heattreatment residual stresses in one tooth.
The online version of the original article can be found under doi: 10.1007/s11665-012-0306-0. Zhichao Li, and Andrew M. Freborg, Deformation Control Technology, Inc, 7261 Engle Road, Suite 105, Cleveland, OH 44130; Bruce D. Hansen, Sikorsky Aircraft Corporation, 6900 Main Street, Stratford, CT 06615; and T.S. Srivatsan, Division of Materials Science and Engineering, Department of Mechanical Engineering, The University of Akron, Akron, OH 44325. Contact e-mails: zli@ DeformationControl.com, [email protected], [email protected], and [email protected].
1208—Volume 22(4) April 2013
Journal of Materials Engineering and Performance
Data Loading...
