Erratum to: Surface Selective Oxidation of Sn-Added CMnSi TRIP Steel
- PDF / 314,556 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 64 Downloads / 215 Views
DOI: 10.1007/s11661-016-3369-y Ó The Minerals, Metals & Materials Society and ASM International 2016
Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A DOI: 10.1007/s11661-016-3331-z
IN the original article there are several errors in Table IV. The corrected Table IV is given below. Table IV. Calculated Mass Fractions of the MnO and SiO2 Which are Predicted to Form on the Surface of a 1.6 wt Pct Mn-1.5 wt Pct Si Steel After Isothermal Annealing at 1093 K (820 °C) for 47 s Mass Fractions (ppm) Dew Point (°C) 70 60 10
MnO
SiO2
Mn/Si Mass Ratio at the Surface
0 4.89 9 103 2.06 9 104
2.88 9 104 3.19 9 104 3.21 9 104
0.0155 0.2110 1.2600
The calculated Mn/Si mass ratios at the surface are also listed.
LAWRENCE CHO, Post-Doctoral Researcher, EUN JUNG SEO, Graduate Student, and BRUNO C. DE COOMAN, Professor and Director, are with the Materials Design Laboratory, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang 790-784, South Korea. Contact e-mail: [email protected] GEUN SU JUNG, Graduate Student, and DONG WOO SUH, Professor, are with the Computational Metallurgy Laboratory, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang 790-784, South Korea. The online version of the original article can be found under doi: 10.1007/s11661-016-3331-z. Article published online February 24, 2016 2536—VOLUME 47A, MAY 2016
METALLURGICAL AND MATERIALS TRANSACTIONS A
Data Loading...
