Experimental Study on Dynamic Mechanical Properties of a Mock PBX

The mechanical properties and fracture behavior of a mock polymer bonded explosives (PBX) material were studied using the split Hopkinson pressure bar (SHPB) apparatus. The compressive response of the material is measured from strain rate 110–500 s−1. A d

  • PDF / 39,756,071 Bytes
  • 574 Pages / 595.276 x 790.866 pts Page_size
  • 3 Downloads / 288 Views



Series Editor Tom Proulx Society for Experimental Mechanics, Inc., Bethel, CT, USA

For further volumes: http://www.springer.com/series/8922

Vijay Chalivendra • Bo Song • Daniel Casem Editors

Dynamic Behavior of Materials, Volume 1 Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics

Editors Vijay Chalivendra University of Massachusetts Dartmouth, North Dartmouth MA, USA

Bo Song Sandia National Laboratories Department of Mechanics of Materials Livermore, CA, USA

Daniel Casem U.S. Army Research Laboratory Aberdeen Proving Ground, MD, USA

ISSN 2191-5644 ISSN 2191-5652 (electronic) ISBN 978-1-4614-4237-0 ISBN 978-1-4614-4238-7 (eBook) DOI 10.1007/978-1-4614-4238-7 Springer New York Heidelberg Dordrecht London Library of Congress Control Number: 2012948881 # The Society for Experimental Mechanics, Inc. 2013 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)


Dynamic Behavior of Materials, Volume 1: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11–14, 2012. The full set of pr