Fatigue-Life Prediction of Composite Laminate Under Flexural Loading
This investigation concerns the development of two prediction fatigue life models of cross-ply laminates, made up of glass fibre and epoxy resin, loaded under flexural control load. Both models are based on the description of the load’s evolution versus t
- PDF / 43,309,450 Bytes
- 270 Pages / 453.543 x 683.15 pts Page_size
- 85 Downloads / 252 Views
Proceedings of the 4th International Symposium on Materials and Sustainable Development Volume 1: Nano Technology and Advanced Materials
Proceedings of the 4th International Symposium on Materials and Sustainable Development
Abdelbaki Benmounah Mohamed Tahar Abadlia Mohamed Saidi Abdellatif Zerizer •
•
•
Editors
Proceedings of the 4th International Symposium on Materials and Sustainable Development Volume 1: Nano Technology and Advanced Materials
123
Editors Abdelbaki Benmounah Université M’hamed Bougara Boumerdes Boumerdès, Algeria Mohamed Saidi Faculté de Technologie Université M’hamed Bougara Boumerdes Boumerdès, Algeria
Mohamed Tahar Abadlia Université M’hamed Bougara Boumerdes Boumerdès, Algeria Abdellatif Zerizer Université M’hamed Bougara Boumerdes Boumerdès, Algeria
ISBN 978-3-030-43267-6 ISBN 978-3-030-43268-3 https://doi.org/10.1007/978-3-030-43268-3
(eBook)
© Springer Nature Switzerland AG 2020 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Preface
As part of the scientific events which took place within the M’Hamed Bougara University of Boumerdes, the Research Unit: Materials, Processes and Environment of the Faculty of Technology, organizes, from 12 to 14 November 2019, the 4th international conference on materials and sustainable development (4th ISMSD 2019). This scientific, technological and environmental gathering will strive to improve by trying: 1. To deepen the subject relating to nanomaterials and their incorporation in other materials. 2. Take an interest in sustainable development by focusing on renewable energies, recycling and recovery of materials, the quality of which will contribute to improving environmental protection. 3. To deepen the university–ind
