Friction and Wear Methodologies for Design and Control
This book introduces the basic concepts of contact mechanics, friction, lubrication, and wear mechanisms, providing simplified analytical relationships that are useful for quantitative assessments. Subsequently, an overview on the main wear processes is p
- PDF / 9,925,035 Bytes
- 292 Pages / 453.543 x 683.15 pts Page_size
- 66 Downloads / 218 Views
Giovanni Straffelini
Friction and Wear Methodologies for Design and Control
Springer Tracts in Mechanical Engineering Board of editors Seung-Bok Choi, Inha University, Incheon, South Korea Haibin Duan, Beijing University of Aeronautics and Astronautics, Beijing, P.R. China Yili Fu, Harbin Institute of Technology, Harbin, P.R. China Jian-Qiao Sun, University of California, Merced, USA
About this Series Springer Tracts in Mechanical Engineering (STME) publishes the latest developments in Mechanical Engineering - quickly, informally and with high quality. The intent is to cover all the main branches of mechanical engineering, both theoretical and applied, including: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical structures and stress analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluids mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision engineering, Instrumentation, Measurement Materials Engineering Tribology and surface technology
Within the scopes of the series are monographs, professional books or graduate textbooks, edited volumes as well as outstanding PhD theses and books purposely devoted to support education in mechanical engineering at graduate and postgraduate levels.
More information about this series at http://www.springer.com/series/11693
Giovanni Straffelini
Friction and Wear Methodologies for Design and Control
123
Giovanni Straffelini Industrial Engineering Department University of Trento Trento Italy
ISSN 2195-9862 ISSN 2195-9870 (electronic) Springer Tracts in Mechanical Engineering ISBN 978-3-319-05893-1 ISBN 978-3-319-05894-8 (eBook) DOI 10.1007/978-3-319-05894-8 Library of Congress Control Number: 2015934917 Springer Cham Heidelberg New York Dordrecht London © Springer International Publishing Switzerland 2015 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material cont
Data Loading...