Friction Stir Welding and Processing IX

This books presents a current look at friction stir welding technology from application to characterization and from modeling to R&D. It is a compilation of the recent progress relating to friction stir technologies including derivative tech

  • PDF / 15,497,639 Bytes
  • 315 Pages / 453.543 x 683.15 pts Page_size
  • 43 Downloads / 226 Views

DOWNLOAD

REPORT


Edited by

Yuri Hovanski • Rajiv Mishra Yutaka Sato • Piyush Upadhyay • David Yan

The Minerals, Metals & Materials Series

Yuri Hovanski ⋅ Rajiv Mishra ⋅ Yutaka Sato Piyush Upadhyay ⋅ David Yan Editors

Friction Stir Welding and Processing IX

123

Editors Yuri Hovanski Brigham Young University Provo, UT USA

Piyush Upadhyay Pacific Northwest National Laboratory Richland, WA USA

Rajiv Mishra University of North Texas Denton, TX USA

David Yan University of Wisconsin—Green Bay Green Bay, WI USA

Yutaka Sato Tohoku University Sendai Japan

ISSN 2367-1181 ISSN 2367-1696 (electronic) The Minerals, Metals & Materials Series ISBN 978-3-319-52382-8 ISBN 978-3-319-52383-5 (eBook) DOI 10.1007/978-3-319-52383-5 TMS owns copyright; Springer has full publishing rights Library of Congress Control Number: 2016963430 © The Minerals, Metals & Materials Society 2017 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland

Preface

Friction stir welding (FSW) was invented by TWI (formerly The Welding Institute), Cambridge, UK and patented in 1991. The real growth in this field started in 1995. In the last 21 years, FSW has seen a very significant growth in both technology implementation and scientific exploration. This is the ninth symposium on Friction Stir Welding and Processing (FSW/P) held under the auspices of The Minerals, Metals & Materials Society (TMS). The interest and participation in this symposium is an indirect testimony of the growth of this field. This year, a total of 72 abstracts have been accepted, and presentations will require seven oral sessions with an additional poster session with 14 unique posters. The presentations cover all aspects of friction