Fundamentals of the Rheology of Large Deformations
The kinematics of large deformations is discussed by introducing deformation tensors and the rate of strain tensor for finite strains. The dynamics of deformable bodies is treated, as well as the eigen-value problems of the stress tensor and the strain te
- PDF / 16,090,312 Bytes
- 564 Pages / 453.543 x 683.15 pts Page_size
- 11 Downloads / 185 Views
eformation and Flow of Polymeric Materials
Deformation and Flow of Polymeric Materials
Helmut Münstedt Friedrich Rudolf Schwarzl •
Deformation and Flow of Polymeric Materials
123
Helmut Münstedt Friedrich Rudolf Schwarzl Lehrstuhl für Polymerwerkstoffe Friedrich-Alexander-Universität Erlangen-Nürnberg Erlangen Germany
ISBN 978-3-642-55408-7 ISBN 978-3-642-55409-4 DOI 10.1007/978-3-642-55409-4 Springer Heidelberg New York Dordrecht London
(eBook)
Library of Congress Control Number: 2014940158 Ó Springer-Verlag Berlin Heidelberg 2014 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Preface
During the last few decades, the use of polymeric materials has grown so that they form the most important class of materials if counted by volume and it can be regarded as certain that their growth rates will remain high in the future. While at the beginning of the era of polymers Chemistry was the predominant science, Engineering and Physics have become more and more requisite for the successful development of polymeric materials. Engineering, as the efficient production of materials of good quality and their highly sophisticated processing have developed into key factors of economic success; and Physics, as material properties have become decisive for specific applicat
Data Loading...
