GPU DEM Simulations and Experimental Studies of Ball Milling Process for Various Particle Shapes
This work describes a comparative study on the milling process modelled by Discrete Element Method and lab-scale experiments. In particular, analogical complex granular media with spherical and polyhedral shaped particles have been used to support the dev
- PDF / 67,678,317 Bytes
- 1,413 Pages / 453.543 x 683.15 pts Page_size
- 75 Downloads / 210 Views
Xikui Li Yuntian Feng Graham Mustoe Editors
Proceedings of the 7th International Conference on Discrete Element Methods
Springer Proceedings in Physics Volume 188
The series Springer Proceedings in Physics, founded in 1984, is devoted to timely reports of state-of-the-art developments in physics and related sciences. Typically based on material presented at conferences, workshops and similar scientific meetings, volumes published in this series will constitute a comprehensive up-to-date source of reference on a field or subfield of relevance in contemporary physics. Proposals must include the following: – – – – –
name, place and date of the scientific meeting a link to the committees (local organization, international advisors etc.) scientific description of the meeting list of invited/plenary speakers an estimate of the planned proceedings book parameters (number of pages/ articles, requested number of bulk copies, submission deadline).
More information about this series at http://www.springer.com/series/361
Xikui Li Yuntian Feng Graham Mustoe •
Editors
Proceedings of the 7th International Conference on Discrete Element Methods
123
Editors Xikui Li Department of Engineering Mechanics Dalian University of Technology Dalian, Liaoning China
Graham Mustoe Department of Mechanical Engineering Colorado School of Mines Golden, CO USA
Yuntian Feng College of Engineering Swansea University Swansea UK
ISSN 0930-8989 Springer Proceedings in Physics ISBN 978-981-10-1925-8 DOI 10.1007/978-981-10-1926-5
ISSN 1867-4941
(electronic)
ISBN 978-981-10-1926-5
(eBook)
Library of Congress Control Number: 2016948278 © Springer Science+Business Media Singapore 2017 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer Nature Singapore Pte Ltd. The registered company address is: 152 Beach Road, #22-06/08 Gateway East, Singapore 189721, Singapore
Preface
On behalf of the Org
