• PDF / 1,927,188 Bytes
• 7 Pages / 597.28 x 785 pts Page_size
• 54 Downloads / 346 Views

DOWNLOAD

REPORT

I.

INTRODUCTION

T H E ductility of Ni3AI alloys at elevated temperatures is greatly affected by test environments, such as vacuum and air, as well as vacuum quality. H 41 Our previous work cSl revealed that the ductility of Ni-23A1-0.5Hf0.2B (at. pct),* tensile tested at 1033 K under very care*All compositions are reported in atomic percent.

fully controlled vacuum (

Recommend Documents

Ductility of cold-rolled and recrystallized Ni 3 Al foils

271 95 3MB

High temperature strength and ductility of recrystallized Ni 3 Al-Ni 3 Mn alloys

208 103 2MB

Mechanical Loss Associated with Stress Anomaly in Ni 3 Al and Ni 3 (Al, Ta) Single Crystals

284 105 531KB

Improved Strength and Ductility of Ni 3 Al by Boron Modification and Rapid Solidification

172 8 1MB

Mechanistic studies in combustion synthesis of Ni 3 Al and Ni 3 Al-matrix composites

230 80 3MB

Ductility Enhancement via Microstructural Control in Cr MODIFIED Ni 3 Al Single Crystal

237 105 2MB

Proton Irradiation-induced Disordering Reactions, Ductility and Strengthening of Ni 3 Al

171 23 2MB

Ductility and Fracture Behavior of Single Crystalline Ni 3 Al with Boron Additions

264 19 1MB

Microstructure and Room-Temperature Ductility of Unidirectionally Grown Ni 3 Al

170 73 4MB

Morphological Stability of Ni(Al)/Ni 3 Al Nanolaminate Composites

243 0 2MB

Microstructural observations of pressure cast Ni 3 Al/Al 2 O 3 and Ni/Al 2 O 3 composites

249 84 3MB

Combustion synthesis of Ni 3 Al and Ni 3 Al-matrix composites

246 53 3MB