• PDF / 1,598,615 Bytes
• 13 Pages / 593.972 x 792 pts Page_size
• 5 Downloads / 239 Views

DOWNLOAD

REPORT

N. Stiegler, D. Bellucci, G. Bolelli, V. Cannillo, R. Gadow, A. Killinger, L. Lusvarghi, and A. Sola (Submitted June 29, 2011; in revised form November 23, 2011)

In this study, hydroxyapatite (HAp) coatings were deposited on Ti plates by the high-velocity suspension flame spraying (HVSFS) technique. The process characteristic, the microstructure and phase composition of the coatings are significantly influenced by the solvent and by the design of the combustion chamber (CC) of the HVSFS torch. Water-based suspensions always lead to fairly low surface temperatures (350 °C), deposition efficiencies

Recommend Documents

Detonation Sprayed Coatings for Aerospace Applications

221 84 851KB

Hydroxyapatite Coatings Produced by Right Angle Magnetron Sputtering for Biomedical Applications

202 57 688KB

Modern Approach of Hydroxyapatite Based Composite for Biomedical Applications

257 104 18MB

Characterization of Hydroxyapatite Coated Mg for Biomedical Applications

167 44 1MB

Thermal-Sprayed Photocatalytic Coatings for Biocidal Applications: A Review

176 79 3MB

Cold Sprayed Metal Coatings

225 65 11MB

Application of Flame-Sprayed Coatings as Heating Elements for Polymer-Based Composite Structures

155 66 1MB

Development of Detonation Flame Sprayed Cu-Base Coatings Containing Large Ceramic Particles

164 42 554KB

Correction to: Process Parameter Impact on Suspension-HVOF-Sprayed Cr 2 O 3 Coatings

183 105 162KB

Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings

210 22 4MB

Microstructure and Properties of Porous Abradable Alumina Coatings Flame-Sprayed with Semi-molten Particles

134 66 3MB

Antibacterial Property and Biocompatibility of Plasma Sprayed Hydroxyapatite/Silver Composite Coatings

143 70 117KB