• PDF / 1,785,034 Bytes
• 12 Pages / 576 x 792 pts Page_size
• 27 Downloads / 270 Views

DOWNLOAD

REPORT

Polycarbonate (Lexan) was implanted with 100 and 200 keV B + ions to doses of 0.26, 0.78, and 2.6 x 1015 ions/cm 2 at room temperature (

Recommend Documents

Improved wear properties of high energy ion-implanted polycarbonate

156 82 2MB

Wear Properties and Surface Structure of Ion Implanted Glassy Carbon

207 25 700KB

Tribology and Abrasive Wear of Mo Lecularly Doped Polycarbonate Coatings

167 63 1MB

High Temperature and Wear Resistant Materials with Improved Operating Properties

178 12 88KB

Hardness as a Measure of Wear Resistance

255 96 299KB

The wear behavior of nitrogen-implanted metals

228 26 2MB

Hardness of ion-implanted Ni 3 Al and TiAl

190 51 370KB

Composition, microstructure, hardness, and wear properties of high-speed steel rolls

174 86 3MB

The Hardness and Wear of Electrochemically Grown Tantalum Oxide

193 84 400KB

Lattice location and hardness of Ta-implanted Ni 3 Al

210 22 578KB

Fullerene-induced crystallization toward improved mechanical properties of solvent casting polycarbonate films

147 1 2MB

Wear Behavior of Flat and Graded Profile Boron-Implanted Beryllium

165 80 1MB