Industry 4.0 Developments towards the Fourth Industrial Revolution
This book provides an overview of the burgeoning next generation of industry- Industry 4.0, which promises to increase flexibility in manufacturing in tandem with mass communication, improved productivity and better quality. This volume provides a compreh
- PDF / 1,109,012 Bytes
- 69 Pages / 439.371 x 666.143 pts Page_size
- 72 Downloads / 216 Views
Kaushik Kumar Divya Zindani J. Paulo Davim
Industry 4.0 Developments towards the Fourth Industrial Revolution 123
SpringerBriefs in Applied Sciences and Technology Manufacturing and Surface Engineering
Series Editor Joao Paulo Davim, Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
This series fosters information exchange and discussion on all aspects of manufacturing and surface engineering for modern industry. This series focuses on manufacturing with emphasis in machining and forming technologies, including traditional machining (turning, milling, drilling, etc.), non-traditional machining (EDM, USM, LAM, etc.), abrasive machining, hard part machining, high speed machining, high efficiency machining, micromachining, internet-based machining, metal casting, joining, powder metallurgy, extrusion, forging, rolling, drawing, sheet metal forming, microforming, hydroforming, thermoforming, incremental forming, plastics/composites processing, ceramic processing, hybrid processes (thermal, plasma, chemical and electrical energy assisted methods), etc. The manufacturability of all materials will be considered, including metals, polymers, ceramics, composites, biomaterials, nanomaterials, etc. The series covers the full range of surface engineering aspects such as surface metrology, surface integrity, contact mechanics, friction and wear, lubrication and lubricants, coatings an surface treatments, multiscale tribology including biomedical systems and manufacturing processes. Moreover, the series covers the computational methods and optimization techniques applied in manufacturing and surface engineering. Contributions to this book series are welcome on all subjects of manufacturing and surface engineering. Especially welcome are books that pioneer new research directions, raise new questions and new possibilities, or examine old problems from a new angle. To submit a proposal or request further information, please contact Dr. Mayra Castro, Publishing Editor Applied Sciences, via [email protected] or Professor J. Paulo Davim, Book Series Editor, via [email protected]
More information about this series at http://www.springer.com/series/10623
Kaushik Kumar Divya Zindani J. Paulo Davim •
•
Industry 4.0 Developments towards the Fourth Industrial Revolution
123
Kaushik Kumar Department of Mechanical Engineering Birla Institute of Technology Mesra, Ranchi, Jharkhand, India
Divya Zindani Department of Mechanical Engineering National Institute of Technology Silchar Silchar, Cachar, Assam, India
J. Paulo Davim Department of Mechanical Engineering University of Aveiro Aveiro, Portugal
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISSN 2365-8223 ISSN 2365-8231 (electronic) Manufacturing and Surface Engineering ISBN 978-981-13-8164-5 ISBN 978-981-13-8165-2 (eBook) https://doi.org/10.1007/978-981-13-8165-2 © The Author(s), under exclusive licence to Springer Nature Singapore Pte Ltd. 2019 This work is subject to copyright. All rights are solely
Data Loading...
