Intelligent Fixtures for the Manufacturing of Low Rigidity Components
The book summarizes the results of the European research project "Intelligent fixtures for the manufacturing of low rigidity components" (INTEFIX). The structure of the book follows the sub-projects which are dedicated to case studies within the scenarios
- PDF / 10,816,022 Bytes
- 203 Pages / 453.543 x 683.15 pts Page_size
- 71 Downloads / 189 Views
Hans-Christian Möhring Petra Wiederkehr Oscar Gonzalo Petr Kolar
Intelligent Fixtures for the Manufacturing of Low Rigidity Components
Lecture Notes in Production Engineering
Lecture Notes in Production Engineering (LNPE) is a new book series that reports the latest research and developments in Production Engineering, comprising: • • • • • • • • •
Biomanufacturing Control and Management of Processes Cutting and Forming Design Life Cycle Engineering Machines and Systems Optimization Precision Engineering and Metrology Surfaces
LNPE publishes authored conference proceedings, contributed volumes and authored monographs that present cutting-edge research information as well as new perspectives on classical fields, while maintaining Springer’s high standards of excellence. Also considered for publication are lecture notes and other related material of exceptionally high quality and interest. The subject matter should be original and timely, reporting the latest research and developments in all areas of production engineering. The target audience of LNPE consists of advanced level students, researchers, as well as industry professionals working at the forefront of their fields. Much like Springer’s other Lecture Notes series, LNPE will be distributed through Springer’s print and electronic publishing channels.
More information about this series at http://www.springer.com/series/10642
Hans-Christian Möhring Petra Wiederkehr Oscar Gonzalo Petr Kolar •
Intelligent Fixtures for the Manufacturing of Low Rigidity Components
123
Hans-Christian Möhring Institute of Manufacturing Technology and Quality Management (IFQ) Otto-von-Guericke-University Magdeburg Magdeburg Germany Petra Wiederkehr Institute of Machining Technology (ISF), Faculty of Mechanical Engineering TU Dortmund University Dortmund, Nordrhein-Westfalen Germany
Oscar Gonzalo IK4-Tekniker Mechanical Engineering Unit Eibar, Guipúzcoa Spain Petr Kolar Research Center of Manufacturing Technology (RCMT) Czech Technical University in Prague Prague Czech Republic
ISSN 2194-0525 ISSN 2194-0533 (electronic) Lecture Notes in Production Engineering ISBN 978-3-319-45290-6 ISBN 978-3-319-45291-3 (eBook) DOI 10.1007/978-3-319-45291-3 Library of Congress Control Number: 2017941067 © Springer International Publishing Switzerland 2018 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The pu
Data Loading...
