Interdependence of Morphological, Mechanical and Fracture Behaviour of Toughened Bio-Based Polyamide 11
The present study embodies the fabrication of toughened polyamide 11 blends via melt blending route with POE-g-MA (impact modifier) and their characterization. The structural, thermal, mechanical and fracture performance were investigated for the blends i
- PDF / 32,756,944 Bytes
- 656 Pages / 439.37 x 666.142 pts Page_size
- 112 Downloads / 147 Views
Prita Pant Sushil K. Mishra Purna Chandra Mishra Editors
Advances in Mechanical Processing and Design Select Proceedings of ICAMPD 2019
Lecture Notes in Mechanical Engineering Series Editors Francisco Cavas-Martínez, Departamento de Estructuras, Universidad Politécnica de Cartagena, Cartagena, Murcia, Spain Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Francesco Gherardini, Dipartimento di Ingegneria, Università di Modena e Reggio Emilia, Modena, Italy Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Vitalii Ivanov, Department of Manufacturing Engineering Machine and Tools, Sumy State University, Sumy, Ukraine Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Justyna Trojanowska, Poznan University of Technology, Poznan, Poland
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering—quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor of your location: China: Dr. Mengchu Huang at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. All books published in the series are submitted for consideration in Web of Science.
More information about this series at http://www.springer.com/series/11236
Prita Pant Sushil K. Mishra Purna Chandra Mishra •
•
Editors
Advances in Mechanical Processing and Design Select Proceedings of ICAMPD 2019
123
Editors Prita Pant Department of Metallurgical Engineering and Materials Science Indian Institute of Technology Bombay Mumbai, Maharashtra, India
Sushil K. Mishra Department of Mechanical Engineering Indian Institute of Technology Bombay Mumbai, Maharashtra, India
Purna Chandra Mishra School of Mechanical Engineering KIIT Deemed to be University Bhubaneswar, Odisha, India
ISSN 2
