JKR, DMT and More: Gauging Adhesion of Randomly Rough Surfaces
Widely known adhesion contact mechanics theories are the Derjaguin, Muller & Toporov (DMT) and Johnson, Kendall & Roberts (JKR) ones.
- PDF / 389,249,802 Bytes
- 2,200 Pages / 453.544 x 683.151 pts Page_size
- 65 Downloads / 237 Views
Antonio Carcaterra Achille Paolone Giorgio Graziani Editors
Proceedings of XXIV AIMETA Conference 2019
Lecture Notes in Mechanical Engineering Series Editors Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Francesco Gherardini, Dipartimento Di Ingegneria, Edificio 25, Università Di Modena E Reggio Emilia, Modena, Modena, Italy Vitalii Ivanov, Department of Manufacturing Engineering Machine and tools, Sumy State University, Sumy, Ukraine
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering - quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor in your country: China: Li Shen at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. The books of the series are submitted for indexing to Web of Science.
More information about this series at http://www.springer.com/series/11236
Antonio Carcaterra Achille Paolone Giorgio Graziani •
•
Editors
Proceedings of XXIV AIMETA Conference 2019
123
Editors Antonio Carcaterra DIMA Sapienza University of Rome Rome, Italy
Achille Paolone DISG Sapienza University of Rome Rome, Italy
Giorgio Graziani DIMA Sapienza University of Rome Rome, Italy
ISSN 2195-4356 ISSN 2195-4364 (electronic) Lecture Notes in Mechanical Engineering ISBN 978-3-030-41056-8 ISBN 978-3-030-41057-5 (eBook) https://doi.org/10.1007/978-3-030-41057-5 © Springer Nature Switzerland AG 2020 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting,
