Lunar Satellite Orbit Measurement Based on Visual/Radio Fusion

A set of new orbit Measurement method was proposed based on the integration of high-resolution lunar surface imaging and ground-based radio measurement. Through the method, the advantage of stable tracking by radio measurements and the advantage of short-

  • PDF / 2,177,903 Bytes
  • 10 Pages / 439.37 x 666.142 pts Page_size
  • 104 Downloads / 230 Views

DOWNLOAD

REPORT


Lunar Satellite Orbit Measurement Based on Visual/Radio Fusion Yanlong Bu, Geshi Tang, Jianfeng Cao, Songjie Hu, Lue Chen and Baofeng Wang

Abstract A set of new orbit Measurement method was proposed based on the integration of high-resolution lunar surface imaging and ground-based radio measurement. Through the method, the advantage of stable tracking by radio measurements and the advantage of short-range measurement by onboard camera are expect to be fully integrated. The basic idea of the method is as following. First, combined with orbit constraints of a lunar high resolution imaging satellite, relying on optical imaging information and available reference images on the lunar surface, and based on the visual related theory of multi-view geometry and photogrammetry, the accurate location information of the satellite platform in a moment was calculated. Then, the location information was fused reasonably with satellite speed, range and angle by ground radio measurements. Thereby, a more flexible lunar orbiter orbit determination method than the existing methods was established. Currently, based on real data of ‘‘Chang’E II’’ satellite, visual/radio fusion-based orbit determination model were studied. Transfer relationship of the position and attitude between the satellite and imaging points on lunar surface was derived. Typical aspects of information fusion-based orbit determination were analyzed. Preliminary experimental results verify the feasibility of the proposed method. After parameter calibration, the partial positioning accuracy of ‘‘Chang’E II’’ is better than 100 m, variance limits at 30 m.

Supported by NSFC (No.41204026); DPFC (No.9140A24060712KG13290). Y. Bu (&)  G. Tang  J. Cao  S. Hu  L. Chen  B. Wang National Key Laboratory of Science and Technology on Aerospace Flight Dynamics, Beijing, China e-mail: [email protected] Y. Bu Beijing Aerospace Control Center, Beijing, China

J. Sun et al. (eds.), China Satellite Navigation Conference (CSNC) 2013 Proceedings, Lecture Notes in Electrical Engineering 245, DOI: 10.1007/978-3-642-37407-4_11, Ó Springer-Verlag Berlin Heidelberg 2013

123

124

Y. Bu et al.





Keywords Lunar orbiter Orbit measure and determination Photogrammetry Radio measurement Information fusion ‘‘Chang’e II’’ satellite







11.1 Introduction Under the current lunar and deep space TT&C system, the orbit measurement of the lunar satellite and other orbiter relies mainly on the earth based radio method, including the unified microwave system and the radio interferometry system [1]. In this way the accuracy of measurement is affected by the long distance between the earth based measurement station and the orbiter, also it’s limited by the earth based observational arc. The visual/radio fusion positioning, with its flexibility and immediacy, has been well used in the UAV and the cruise missile. As the development of satellite borne high resolution imaging technology, the research of the orbiter positioning method with the information of the high resolution images started