Mechanical and Microstructural Characterization of Copper and Carbon Nanotubes Composites

In recent years, copper matrix with carbon nanotubes (CNTS) reinforcement has attracted increasing attention. The distribution of reinforcement in composites is a crucial factor, determines the homogeneity and mechanical properties. By using the powder me

  • PDF / 55,961,581 Bytes
  • 1,067 Pages / 439.37 x 666.142 pts Page_size
  • 47 Downloads / 240 Views

DOWNLOAD

REPORT


A. Arockiarajan M. Duraiselvam Ramesh Raju   Editors

Advances in Industrial Automation and Smart Manufacturing Select Proceedings of ICAIASM 2019

Lecture Notes in Mechanical Engineering Series Editors Francisco Cavas-Martínez, Departamento de Estructuras, Universidad Politécnica de Cartagena, Cartagena, Murcia, Spain Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Francesco Gherardini, Dipartimento di Ingegneria, Università di Modena e Reggio Emilia, Modena, Italy Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Vitalii Ivanov, Department of Manufacturing Engineering Machine and Tools, Sumy State University, Sumy, Ukraine Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Justyna Trojanowska, Poznan University of Technology, Poznan, Poland

Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering—quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •

Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology

To submit a proposal or request further information, please contact the Springer Editor of your location: China: Dr. Mengchu Huang at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. The books of the series are submitted for indexing to Web of Science.

More information about this series at http://www.springer.com/series/11236

A. Arockiarajan M. Duraiselvam Ramesh Raju •



Editors

Advances in Industrial Automation and Smart Manufacturing Select Proceedings of ICAIASM 2019

123

Editors A. Arockiarajan Indian Institute of Technology Madras Chennai, India

M. Duraiselvam National Institute of Technology Tiruchirappalli Tiruchirappalli, India

Ramesh Raju Santhiram Engineering College Nandyal, India

ISSN 2195-4356 ISSN 2195-4364 (electronic) Lecture Notes in Mechanical Engineering ISBN 978-981-15-4738-6 ISBN 978-981-15-4739-3 (eBook) https://doi.org/10.100