Metallic Microlattice Structures Manufacture, Materials and Applicat
This work reviews the current state of the art in metallic microlattice structures, manufactured using the additive manufacturing processes of selective laser melting, electron beam melting, binder jetting and photopolymer wave guides. The emphasis is on
- PDF / 4,719,777 Bytes
- 115 Pages / 439.371 x 666.143 pts Page_size
- 87 Downloads / 206 Views
Robert Mines
Metallic Microlattice Structures Manufacture, Materials and Application
SpringerBriefs in Applied Sciences and Technology Structural Mechanics
Series editor Emmanuel E. Gdoutos, Department of Theoretical and Applied Mechanics, Democritus University of Thrace, Xanthi, Greece
More information about this series at http://www.springer.com/series/15039
Robert Mines
Metallic Microlattice Structures Manufacture, Materials and Application
123
Robert Mines School of Engineering University of Liverpool Liverpool, UK
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISSN 2520-8020 ISSN 2520-8039 (electronic) SpringerBriefs in Structural Mechanics ISBN 978-3-030-15231-4 ISBN 978-3-030-15232-1 (eBook) https://doi.org/10.1007/978-3-030-15232-1 Library of Congress Control Number: 2019933851 © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2019 This work is subject to copyright. All rights are solely and exclusively licensed by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Preface
The book has five main themes, namely: 1. Enhancement of specific selected structural applications using additive manufacturing lattice structures, e.g. sandwich beams, sandwich panels and energy absorption devices (static and impact), for use in lightweight structures. 2. Integrated discussion of manufacture, materials and application is followed. In the developing additive manufacturing technology, a development in one area will influence other areas, and so an integrated approach is needed. 3. The structural behaviours and applications discussed here have been studied for many years for conventional structures manufactured using traditional processes, and some of this relevant literature is discussed
Data Loading...
