Milling distortion prediction for thin-walled component based on the average MIRS in specimen machining
- PDF / 2,462,318 Bytes
- 14 Pages / 595.276 x 790.866 pts Page_size
- 15 Downloads / 178 Views
ORIGINAL ARTICLE
Milling distortion prediction for thin-walled component based on the average MIRS in specimen machining Zhongxi Zhang 1,2 & Zhao Zhang 1,2 & Dinghua Zhang 1,2 & Ming Luo 1,2 Received: 5 July 2020 / Accepted: 19 October 2020 # Springer-Verlag London Ltd., part of Springer Nature 2020
Abstract Machining-induced residual stress (MIRS) has significant effects on the distortion of thin-walled part, especially for the titanium alloy and superalloy parts with complex shape. However, the MIRS is hard to accurately predict through analytical modeling and finite element simulation. In addition, the measurement of MIRS is time-consuming and costly. Therefore, the MIRS caused distortion is hard to accurately predict. In the present study, a novel method is introduced to calculate the average value of MIRS by milling a thin-walled specimen and measuring the distortion, and predict the distortion of the thin-walled component with the calculated average MIRSs. Firstly, the mathematical relationship between the average MIRS and the distortion of specimen is established by analyzing the distribution of residual stress after machining and distortion. In order to estimate the average MIRS accurately, the curvatures of the distorted specimen in both directions are calculated by processing the specimen and measuring the distortion. Based on the calculated average MIRS and the finite element method (FEM), the distortion of the thin-walled component caused by MIRS can be accurately predicted. After that, a relative error calculation model for equivalent bending moment is constructed to assess the algorithm. Subsequently, two-piece of thin-walled specimens are milled to calculate the average MIRSs. Finally, the thin-walled plate and a simplified blade are milled with the same machining parameters to verify the presented method. The result demonstrates the satisfactory agreement between the measured and simulated distortion with the error less than 20%. Keywords Machining-induced residual stress . Thin-walled component . Milling . Distortion prediction
1 Introduction The machining-induced residual stress (MIRS) is generated inevitably due to the high temperature, high pressure, and high strain rate of tool-workpiece engagement region during the metal cutting process, especially for the difficult-to-cut materials like titanium and nickel-based alloys. MIRS has a significant influence on the machining accuracy and dimensional stability of a thin-walled workpiece such as blade and casing, and the residual stress–induced distortion is one of the main * Ming Luo [email protected] 1
Key Laboratory of High Performance Manufacturing for Aero Engine, Ministry of Industry and Information Technology, Northwestern Polytechnical University, Xi’an 710072, People’s Republic of China
2
Engineering Research Center of Advanced Manufacturing Technology for Aero Engine, Ministry of Education, Northwestern Polytechnical University, Xi’an 710072, People’s Republic of China
reasons for scrapping [1]. Therefore, it is critical to accurat
Data Loading...
