• PDF / 1,257,130 Bytes
• 13 Pages / 607.68 x 788.88 pts Page_size
• 105 Downloads / 269 Views

DOWNLOAD

REPORT

---

5/24/04

16:11

Page 2013

Multiscale Structure and Properties of Cast and Deformation Processed Polycrystalline NiTi Shape-Memory Alloys CARL P. FRICK, ALICIA M. ORTEGA, JEFFREY TYBER, KEN GALL, and HANS J. MAIER The objective of this study is to examine fundamental processing-structure-property relationships in polycrystalline NiTi bars. Three different polycrystalline Ti-50.9 at. pct Ni (Ti-55.7 wt pct Ni) materials were examined: (1) cast, (2) cast then hot rolled, and (3) cast, hot rolled, then cold drawn. The structure of the materials was investigated at various scales ranging from nanometers to micrometers. The cast materials contained random crystallographic textures along the loading axis of the extracted samples. The hot-rolled and cold-drawn materials contained a strong 111 texture parallel to the deformationprocessing direction. The high-temperature hot-rolling process facilitated recrystallization and recovery, and curtailed precipitate formation, leaving the hot-rolled and cold-drawn materials in near solutionized states. The cold-drawn material contained a high density of dislocations and martensite. After a mild aging treatment, all three materials contained distributed coherent Ti3Ni4 precipitates on the order of 10 nm in size. The cast material was capable of full shape-memory transformation strain recovery up to approximately 5 pct strain at room temperature under both tension and compression. The hot-rolled and cold-drawn materials demonstrated significant tension-compression stress-strain asymmetry owing to their strong crystallographic texture. Under compression, the deformation-processed materials were only capable of 3 pct transformation strain recovery while under tension they were capable of nearly 7 pct transformation strain recovery. Based on the present results, the presence of small coherent Ti3Ni4 precipitates is determined to be the driving force for the favorable strain transformation strain recovery properties in all three materials, despite drastically different grain sizes and crystallographic textures. The unique dependence of elastic modulus on stress-state, temperature, and structure is also presented and discussed for the deformation-processed materials. In addition, we demonstrate that the appearance of a Lüders band transformation under tensile loading can be controlled by material structure. Specifically, the presence of significant martensite and dislocations in the cold-drawn materials was shown to mitigate the Lüders band propagation and result in a more gradual transformation.

I. INTRODUCTION

SHAPE-MEMORY alloys such as nickel-titanium (NiTi) possess the capability to recover relatively large strains induced by mechanical deformation, either spontaneously (pseudoelasticity) or due to application of heat (shape memory). Among numerous other applications, NiTi shape-memory alloys have the potential to enhance civil infrastructure as passive and active structural control members.[1,2] For example, NiTi is a proposed material for large restrainer bars in bridges to re