New Polypropylene-boron Oxide Composite with a High Tensile Strength: A Possible Method for the Conversion of Microcompo

  • PDF / 152,831 Bytes
  • 8 Pages / 612 x 792 pts (letter) Page_size
  • 56 Downloads / 169 Views

DOWNLOAD

REPORT


1056-HH08-69

New Polypropylene-boron Oxide Composite with a High Tensile Strength: A Possible Method for the Conversion of Microcomposite to Nanocomposite

Shwetha Chopra1, Changfeng Ge2, and K S.V. Santhanam3,4 1

Center For Materials Science and Engineering, Rochester Institute of Technology, Lomb Memorial Drive, Rochester, NY, 14623 2

American Packaging Corporation -Centre for Packaging Innovation, Rochhester Institute of Technology, Lomb Memorial Drive, Rochester, NY, 14623 3

Center For Materials Science and Engineering, Rochester Institute of Technology, Lomb memorial Drive, Rochester, NY, 14623 4

Department of Chemistry, Rochester Institute of Technology, Lomb memorial Drive, Rochester, NY, 14623

Abstract Industrially viable blends having microstructures that can be converted into a nanostructured material by post chemical treatments, potentially should have a commercially viable solution to the development of nanostructured materials for practical applications. In this regard a polypropylene-boron oxide (PPBO) blend provides a model study here. In this paper we wish to report the synthesis of PPBO blends with different concentrations of boron oxide by melt grafting and through reactive extrusion. The tensile strengths of the ideal blend has been found to be 62% higher than polypropylene (PP). By chemically treating the blends for a period of 24 hours to 72 hours the tensile strength of the blends increased by 152%. The blends have been characterized by Fourier transform infra red spectroscopy (FTIR) and scanning electron microscopy (SEM). An interesting characteristic of the PPBO blend has been the development of surface potential that changes upon visible light excitation. The increased tensile strength has been attributed to the conversion of micro structured blends to nanostructured blends. The improvement in thermal stability can be attributed to a good PP matrix-oxide interaction and also due to the thermal conductivity of the boron oxide. The good dispersion of the nanotubes in the polymer matrix allows the spreading of heat uniformly along the fiber. Key words: Polypropylene, polypropylene-boron oxide blend, boron oxide, tensile strength, SEM, surface potential

INTRODUCTION Polymer blends made with nanocomposited materials have been predicted to have better engineering applications than the blends made with macroscopic materials. Two possible synthetic methods are considered for making nanocomposited polymer blends. In one method the blend could be made using bulk quantities of macroscopic materials and later converting it into nanocomposited structured material by chemical treatments. In the second method the polymer blends could be made directly by using nanoscopic materials. The second method although is an easy way of making the blends, the cost would be high and industrially not viable. In this paper we report the first time preparation of PPBO blend and an attempt at the conversion of a micropolymer blend to a nanopolymer blend. In the literature, PPBN double layer composite has been manuf