• PDF / 3,007,393 Bytes
• 7 Pages / 612 x 828 pts Page_size
• 35 Downloads / 248 Views

DOWNLOAD

REPORT

On the Formation of Dispersoids during Rapid Solidification of an AI-Fe-Ni Alloy W.J. BOETI'INGER, L. A. BENDERSKY, R. J. SCHAEFER, and E S. BIANCANIELLO Examination of the effect of rapid solidification velocity on the microstructure of AI-3.7 wt pct Nil.5 wt pct Fe has revealed a new mechanism for the formation of discrete second phase particles in rapidly solidified alloys. Cellular growth of a-A1 occurs with the intercellular phase, A19(Fe, Ni) 2 in two distinct morphologies. At low velocity (

Recommend Documents

Rapid Solidification of an Aluminum-Neodymium Alloy

218 15 2MB

The Sequence of Intermetallics Formation during the Solidification of an Al-Mg-Si Alloy Containing La

183 42 594KB

Simulation of Shrinkage Porosity Formation During Alloy Solidification

255 23 7MB

Modeling of crystal growth during rapid solidification

212 56 1MB

Dopant Incorporation during Rapid Solidification

225 12 2MB

Rapid Solidification Effects on the Development of an HCP Matrix in a Co-20Cr Alloy

103 20 671KB

The formation of single-phase equiatomic MnBi by rapid solidification

162 62 2MB

Influence of gravity on the dispersoids during the melting of an oxide dispersion-strengthened alloy (INCONEL MA754)

184 47 619KB

The mechanisms of formation and prevention of channel segregation during alloy solidification

214 59 3MB

Formation of the Fe-Containing Intermetallic Compounds during Solidification of Al-5Mg-2Si-0.7Mn-1.1Fe Alloy

170 16 2MB

Enthalpies of a binary alloy during solidification

199 77 441KB

Nonequilibrium Interface Kinetics During Rapid Solidification

195 41 918KB