Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing
This book gathers the proceedings of the 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), held in Belgrade, Serbia, on 1–4 June 2020. The event marks the latest in a series of high-level conferences that bring
- PDF / 70,912,692 Bytes
- 370 Pages / 453.543 x 683.15 pts Page_size
- 107 Downloads / 270 Views
Lihui Wang · Vidosav D. Majstorovic · Dimitris Mourtzis · Emanuele Carpanzano · Govanni Moroni · Luigi Maria Galantucci Editors
Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing AMP 2020
Lecture Notes in Mechanical Engineering Series Editors Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Francesco Gherardini, Dipartimento Di Ingegneria, Edificio 25, Università Di Modena E Reggio Emilia, Modena, Modena, Italy Vitalii Ivanov, Department of Manufacturing Engineering Machine and tools, Sumy State University, Sumy, Ukraine
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering - quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor in your location: China: Dr. Mengchu Huang at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. The books of the series are submitted for indexing to Web of Science.
More information about this series at http://www.springer.com/series/11236
Lihui Wang Vidosav D. Majstorovic Dimitris Mourtzis Emanuele Carpanzano Govanni Moroni Luigi Maria Galantucci •
•
•
•
•
Editors
Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing AMP 2020
123
Editors Lihui Wang Department of Production Engineering Royal Institute of Technology Stockholm, Sweden Dimitris Mourtzis Department of Mechanical Engineering and Aeronautics University of Patras Patras, Greece Govanni Moroni Department of Mechanical Engineering Politecnico di Milano Milan, Italy
Vidosav D. Majstorovic Faculty of Mechanical Engineering University of
