Proceedings of the 18th International Meshing Roundtable
This volume contains the articles presented at the 18th International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and held October 25-28, 2009 in Salt Lake City, Utah, USA. The first IMR was held in 1992, and the conf
- PDF / 34,072,692 Bytes
- 650 Pages / 430 x 660 pts Page_size
- 48 Downloads / 249 Views
Brett W. Clark (Ed.)
Proceedings of the 18th International Meshing Roundtable
ABC
Brett W. Clark CUBIT Project Lead Computational Simulation Infrastructure (1543) Sandia National Laboratories P.O. Box 5800 Albuquerque, NM, 87185-1321 USA E-mail: [email protected]
ISBN 978-3-642-04318-5
e-ISBN 978-3-642-04319-2
DOI 10.1007/978-3-642-04319-2 Library of Congress Control Number: 2009934315 c 2009 Springer-Verlag Berlin Heidelberg
This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Typesetting: Data supplied by the authors Production: Scientific Publishing Services Pvt. Ltd., Chennai, India Cover Design: WMX Design GmbH, Heidelberg. Printed in acid-free paper 987654321 springer.com
Preface
The papers in this volume were selected for presentation at the 18th International Meshing Roundtable (IMR), held October 25-28, 2009 in Salt Lake City, UT, USA. The conference was started by Sandia National Laboratories in 1992 as a small meeting of organizations striving to establish a common focus for research and development in the field of mesh generation. Now after 18 consecutive years, the International Meshing Roundtable has become recognized as an international focal point annually attended by researchers and developers from dozens of countries around the world. The 18th International Meshing Roundtable consists of technical presentations from contributed papers, research notes, keynote and invited talks, short course presentations, and a poster session and competition. The Program Committee would like to express its appreciation to all who participate to make the IMR a successful and enriching experience. The papers in these proceedings were selected from more than 40 paper submissions. Based on input from peer reviews, the committee selected these papers for their perceived quality, originality, and appropriateness to the theme of the International Meshing Roundtable. We would like to thank all who submitted papers. We would also like to thank the colleagues who provided reviews of the submitted papers. The names of the reviewers are acknowledged in the following pages. We extend special thanks to Jacqueline Hunter for her time and effort to make the 18th IMR another outstanding conference.
August 2009
18th IMR Program Committ
